Search results

while we're in the cat area.. the emission light came on today after I wanted to get the tailpipes re-aligned- this involved some banging with a hammer at some joints as they were stuck and I think this messed up the second lambda sensor Am I right saying that the second lambda is indeed the...

it's to be done then ;) thx!

I was thinking at the loss of back pressure bla bla but fcuk I'll do it I suppose I'm still opened to suggestions though ;)

Basically the narrow cat exit towards the center section (the one that needs to be cut and replaced with a 2,5" exit pipe) has a crack in it and without providing details the guy who welded it said it might not last for long so.. Is the cat mod worth the hassle? I know BTB does something like...

good job fitting these to a MK3 ;)

hankook rs-2. solid sidewall, good on road and track days. cheaper than most performance tyres also

many say red means you want to make people think you have brembo's. I think red will look good with most colours and there is a good number of cars with red painted calipers straight out of the factory without them being brembo MK V GTI Leon cupra Octavia vrs just to name a few

exactly ;) I used red on both calipers and plenum, very good quality paint and no problems with high temperature resistance

question is: will the k-tec suspension make the car faster than standard? if the answer is yes than it's worth the money. Generally people say the car goes better with these cheap kits but I haven't seen a lap time std vs cheap coils to see if it really is a difference I'd buy them though just...

blue vs black.. black I'd say you can do this cheaper by using hammerite and a brush

he bought the car with them on so couldn't tell edit: you could email here: info@ozracingltd.co.uk according to the official website they're the UK distributor

not true^ a friend has 15x7" ultras on his 172. maybe they are harder to get right now

had a read recently and fitting a de-cat will decrease back-pressure which some will say it won't do good to power or torque. so do you really gain anything from fitting one? my cat exit towards the mid section is slightly damaged and I was thinking of either doing the 2,5" cat mod or to buy a...

^at ~380 it should be good :) as I said if you go for an enclosed induction from a decent manufacturer and run the CAF properly these kits would work.

i'm pleased with my BMC. I think the most important thing is to have a good CAF and avoid heat soak. enclosed IK's will help

my old ones used to leak a bit after use and so are these. so no clue about this

yes they should. but to be on the safe side take a pic before ordering and post it here

try to get some heat to it ( a lighter maybe) it may expand and come off easily

I was fine with rs2 on the front and pe2 on the rear but that's another story. I wanted to know your opinion on rs2 vs 595 rs-r (handling wise)

I went off in an early morning 2 years ago and up the mountain road featured in the "Transfagarasan" episode from Top Gear. it was some 10 km of hard driving towards the top but the OE pads worked well. that was maybe because there were about 10 degrees outside but anyway.. So I'm guessing that...

^ you're saying the rs2's handle better than the federal RS-R? I was tempted to try the federals in the spring. one of my front rs2's was damaged and thought of buying a set or at least 2 federals

there were other clio III owners interested, your pics will provide an answer to many ;)

you can always take off your jets and take a close pic of them, and then a pic of the holes in the bonnet where they attach and I'll tell you if they fit

not sure. I'm having them on my 182 and I'm not sure if they fit the clio III range

spraying pee all over the car, that should be neat :))

another goodie from citroen: xara/c3 windscreen washer jets I have a thread on this. they cost about 6-8 quid

rs2's will stick to the road also.. I know I had them ;)

hankook rs-2 is very grippy, a good trackday tyre and good also for daily driving, it won't last forever as others but you do get the grip ;)

still not good. under heat the grease will thin up and may end up in the friction material area, aided maybe by water, motion, air and such factors. mine squeak but i'm ok with that

man those solid mounts are coooool !