Search results

Hes already bought the paint a while back lol

He needs to make some mods to keep up with us on track I heard :rasp:

Halve the horsepower and you'l be close Adam ;)

Ignore that, its usually where the regulator sits (on a Ph1 engine, you can probably see the silver regulator in my picture). On a 172 Ph2/182 it isn't used as there is only a single feed to the fuel rail, there is no return to the pump.

Quite possibly, I have a thick piece of solid rubber wedged down one side of mine which seems to have made it last forever. Less movement than a Vibratechnics mount for £free.

There should be two threads sticking out the front of the lower inlet, just above the fuel rail. The guard slides over and two nuts hold it on...

GSF sell them for £40-45, same as a Kangoo iirc.

Fuel Rail Guard... Can be had cheap on here, I would imagine quite a few people have one lying around!

Sure I saw it on pistonheads the other day....

Lol, you should have bolted them in...

Lol you always give in...its the same as Wanner, they both do the same!

Yeah proper Teng jobby torque wrench wise, seperate angle gauge too and all seemed well. Used same equipment last time round and it was fine... If it was a HG problem wouldnt I be loosing water? I think im just gona have to leave it be, only got this month for it to last then its being put...

Yeah, headgasket was done in March/April 2009, ran fine all year apart from a bit of smoking (stem seals). Had it off in Jan/Feb 2010 replaced them, head skimmed at same time along with a new HG, been fine since then zero oil usage or smoking up until this coolant problem started...

Yeah, when you give it some RPM and watch it, comes through there no problem!

Fuel pump changed, it went OK for a bit, did a 100 mile run and it never went over half. Then randomly it started going up and down all day for a while, then its been fine since. Last night I got it upto temp, then sat parked up holding it at 3k rpm for a while, temp went up the slightest bit as...

I thought that as it sounds like the same problem I had, Jay thought it did first too so he got a new box... Even with the new box its the same, thinking about it I think it has to be clutch spline/center related now...

Forecast looks like its clearing away by 7-8pm...

Yeah, ive paid £20-30 for second handers before, bit of a saving over new. Ive seen one split in the middle too, thought it was raining then realised it was spraying out the front

May be cracked, one of mine did on the bottom.. Probably cheaper trying to get a second hander, think they are fairly pricey new! I think 172Ben still has the one he took off his car

Does he really have nothing better to do.......................

Il be there, not in mine though!

Il be around, you cant miss it Tim the car park is pretty small, even if they go onto Costco next door you can see it from KK's

The one on my car at the moment gets smaller at the inside end... But I do have another N/S shaft that does not get as small... so I guess it could be either?

Re: Mk1 F4R/172'd Track Car Project Cool, glad they stayed down.. Ive since done the oil cooler black... Much better!

I used normal body paint on mine, mixed from Auto-Paint, who are luckily only down the road. The areas around the letters have bubbled a tiny bit due to heat, but I used etch primer under it and it seems to have lasted (18 months)...

Brembo HC's & PF97's... Im sure Adam will post some pics of his in due course... :)

Have you got a pic of yours fitted?

27/28 all round hot, 205/50/15 GG R888

Bren paid near enough £1k for his, HPI clear and well looked after. The bargins are out there if you are in no major rush...

Good stuff!