Search results

will have to look out for this mate i like it. cup spoiler will finish it off imo:)

+1

yep. are you taking the bumper off?

get rid of everything apart from the 172/ dynamique wheels

take a bulb in with you so you get the right ones.:)

as long as you go for a reputable brand then you know you will be getting quality. but you should be able to get a decent set for your budget.

nice ps mate^^ that looks ace post number 22 is who that was meant for

^^^ Thats a good idea. only on the one side though as said other wise it will look stupid and less like a track ****!:)

1/2 or 3/4 inch?

yes i think they are the same as the front ones but the best way is just get to halfords, pull one front indicator bulb out and one rear one then you can go in and find the correct ones!

not very big mate. i cut away all the plastic mounting for them and just made up my own bracket. it was the only way to fit my tweeters in but they are quite large.

well that seems pretty cheap. i can fit them myself so i think ill just get ones from the motor factors. cheers mate

i think the holders just twist out then the bulbs twists out too.

Did you get my PM matey?

take out any un-necasary wieght such as floor mats, boot carpet and rubbish. remove your fog light bulbs and have no screen washer fluid to save extra weight;)

All round the wheel and the wheel arch made a right mess and hard to clean up!:mad: Does anyone know how much they will be for a standard front set. Im trying to price them up against some aftermarket ones. Car is Mk2 ph1 non rs I have got lowering springs on their with standard shocks and...

that links guff mate. what you want is the offset pin style in the section by the bulbs for halfords there should be flip style cataloughe mounted on the shelf and you can find a clio and it will give you the codes for all of the bulbs the clio takes. then just find the code on the shelf and...

time between coats depends on how warm the room is and how thick you slapped on the previous coat. i like to put the coat on when the previous one is still slightly tacky to reduce the chance of the paint or lacquer running. or getting orange peel.

Looks cool with the belts like that! A bit like a cage:o

one should be dimmer, on should be headlight adjustment. the other, esp?

must be because the backing is off. how much were the pads can you buy a new set?

did you have them on the right way round and the right side? did you clean up the silver clip type things which sit inside the caliper and the edges of the pads touch on? did you copper grease the edge of the pads? did you clean the disk with brake cleaner?

errr. yeh its in the boot. the big black bar at the bottom of the rear seats mate.

18ish

Sounds perfect imo. maybe a bit loud but noice!:)

if i recall correctly you cant just swap the parts over i think. either colour code you existing one or buy a new boot lid.

why did you take the back off them?

-Take the rear speakers out -cut the wire behind the white plug and strip the wires back -feed the new wires through from the old speakers to the boot -use your own initiative as to what route to take behind panels and carpet -be carefull not to pinch the wire somewhere -crimp straight through...

on ph1's they do not sure about the sport though.

only way would be to strip eeeverything! would need thousands spent on the engine to gain any type off increase in speed.