Search results

colour coded door handles??

im spraying mine at the moment take your time because i put the laquer on too early so it has made me go another week without having them in the car. i had to sand it all down again and start from the beggining. my method was sand them down a bit to get them smooth. couple of coats of...

wicked thread its nearly exactly the same as mine so its good to be able to see what some of the mods look like before i do them lol it looks great!

looks good apparantly the slk55 amg is well good

anthracite would look good imo they look like primer in the same colour as your decals!

i dare someone to put wood trim in their clio!!! haha

no the engine wont get too hot if anythink i think it would be good for the engine to disperse heat quicker out of the engine bay. i think its there to prevent the bonnet from getting too hot.

defo no

its behind in the passenger foot well up the top behing the glovebox its just a grommet with one wire going through it.

dont you think it will look wierd unless you do the dash and all other trim bits? get some pics up when you do it please

i dont know about going back to the standard alarm but i know that companies like clifford fit alarms anywhere for you like when your at work.

kie1an mate i cant remember where people said they got them from have a look at some of the project threads on here and the people have said where they got them from. in my opinion i think they only look good if the hole cars stripped out and lots of carbon fibre and race bits.

it must have been a hard crash to cause that but that is obviously what it is from because the roof is quite weak there.

isnt there a guide on this that you can see

havent got a stripped out interior but you could cover the floor in sound froofing and then put carpet over it. that may stop some of the sounds!

dash trims you can get laminated ones then they are laqured a guy on here was selling them on ebay. do a search he has a thread on here about them. door cards are just like a flat piece of cabon fibre so it looks like a race car you can see an example on the project threads a couple of people...

i got a f***ing screw in my tyre today well pissed off they are like two months old. its right on the edge so i screwed it right in and it the tyre isnt going flat but now i got to try and buy myself a new tyre!!!!

spoiler should be worth £30-£35 bit more if its colour coded wheels if they are the dynamique ones which are like the 172 alloys but one inch smaller they should be worth £200-£250 if they are the not like the 172 ones they should be about £100-£150

the blue 5 door with the dodge viper stripes has got to be the worst it made me laugh!

55 plate trophy croydon wellsley road just after the underpass 9am this morning 3 people in the car!

haha didnt think about that you could fit it then slam your bonnet down and oops it was too high!!!

its used after the primer to give a good base colour on which to apply the top coat. eg some primers are red. then they would use a white base coat, then they would apply the *silver* top coat then the laquer!

Power cable down the left side from the grommit i just pushed it up under the trim a bit never needed to take out any trim or seats. When you get to the door pillar i used a coathanger to pull the cable through by where the seatbelt attatches at the bottom. Then it should be out by the back...

theres a black 172 replica really low with green rims and it had a bonnet bra. it was well nice cant remember a name though!!!

its quite hard to help you because even when somebody tries to fix it for you they wont even know what is happening so they will just try a few things and may be able to fix it. you can ask around on here and try and get an answer or you will have to take it to a shop or a garage advise: stay...

i went for silver... it was daring

in the iso block there is a wire which has a constant feed from the battery to the headunit to keep the radio presets and time each time you switch off the engine. when you fitted the headunit maybe one of these wires got pulled out of the connector. i have no idea which wire it would be you...

Upgrading to a dynamique spoiler Purchased off of here and fitted today found it really easy only took about 20mins which included cleaning the parts behind and underneath the spoiler! *** pictures wont upload lol so this is pretty useless***

i didnt think they were plastic but if they are painted then u could possibly just use wax on them like the paintwork. If they are coloured plastic then try something like ag instant show shine it keeps all plastic looking good whatever colour!

i assume you mean the black plastic trim? you need to just give them a good clean then u can use a number of things on them: http://www.4wheelplay.co.uk/exterior-care-trim-bumper-care-c-9_18.html or try either baby oil or wd-40