Search results

If that's the case, i guess you have an issue with your stalk, taking it out is only 2 screws with 2 wires, something to try i guess, easy access.

All the time? Even if no headlights are on ? Tried to move the left lever (like turning on and off) ?

I hope you didn't push one pin of the headlights when inserting the connector, i did that once, the sidelight was the only one that didn't work, ended up returning one to autodoc as damaged, and only after i checked the connector and saw that one side was kindly bent, almost screw'd the...

Well, i think i solved the issue, i had to loosen the right-side bolt (close to the ignition that was holding the steering wheel higher up, basically loosening it let it slide back 2cm and then tighten it again. Removed first the top dash which took some more work... but it was not needed. I'm...

Hello, sorry to bump, Tried to do this today on a dci 04 plate ph2 , is the steering column different or am i doing something wrong? The spacers go in the vertical holes right? Because only one side lowers when unbolted, the other side is fixed. Basically the difference lowered with only 8mm on...

I got one from aliexpress, you'd have to remove the plastic below it, feels somewhat different, but been running it for years and never had a problem, nor has it faded/chipped away.

Fortnite is a crap game to test a GPU, it's CPU-BOUND, and you would not see a massive improvement in performance upgrading the GPU ONLY. GTA-V is also not a good example to test, but you should get around 100fps or so, although if it's GTA-V online there has been reports of massive FPS-DIPPING...

Just did this in my clio the other day! Went for the small upgrade option; Did not buy an ALPINE UTE-92BT or CDE-178BT because i could literally not find them anywhere, even remote places internationally, nobody has them on stock, sadly? or not i guess. Pioneer S520DAB (155€), great little HU...

Yup, now i have a bad wheel bearing on the rear just last week.... GL to me i guess XD , gonna try to change it.

With the wiring only no, but the wiring was causing an "open circuit" permanent error , so they had a problem, probably passenger side from what i saw when i went to fix the connections. But i had an issue with the clockspring which needed changing and i did change it, (it had one of the two...

Disregard my post above, There is a bit of plastic (the other end) that is the support for this spring, there's no zip ties needed, it fits perfectly. To put the spring there, i had to force the spring down, hold it with one ziptie (ziptie is strong asfu**) , then put it in place with the...

update: drivers side: passenger side: I ended up soldering up 1 connection on each side (1 was already tied up together on the passenger side, and i cleaned it up a bit and made it nice. I only left out one connection on the passenger side which seems in good condition and has no cable...

Can someone help please ?

Hello, I got the serv + airbag lights on as far as i can remember, managed to turn them off like 2y ago for a couple months by cleaning the contacts but they came back, went to a shop and they said it was the airbag module which i believe is expensive to replace... but the thing is, now that i...

No one done it from digital to manual ? :p , probably too much trouble, i just like the manual gauges ;))

Hijacking this thread... i got a different issue on mine; The steel cable kind of bent that regulates the direction the air flows (speed is eletronic and hot&cold is the 2nd steel cable that's OK), idk if the manual wheel's did all the force for it to bent or if the manual wheels are damaged...

Installed a second light in the boot following a bit of a guide here (different because mine's a 3-door 04' ; Was it worth it? I mean, in the process i fixed the grid that separates the cargo area to the front that i saw had a screw lose and was making too much noise and i thought that was...

too bad :/, you have a picture of it from the back? I really want a mount like that for my phone, i don't have any mount like that though and GoPro's mounts they're kind of expensivei i know.

When can i get that awesome phone-mount ???? Got a quote for brodit mounts and they're 80€ the set without shipping...

I got a 04' dci ph2, how impossible would be to change the dashboard display from the digital one to the manual one? I got this one and want to change it to this Is it an impossible task while keeping the full funcionality? The layout of the pins on the back is different and won't fit. Is...

If it's like the dci you have to take the wheel housing on that side-front off. here

Problem solved, pictures for future readers because i could not find this info anywhere online, got the part at a scrapeyard for 2€ because renault said it was discontinued and no stock was available. (it was 5€ at renault if it had stock apparently) . P/N confirmed: 8200700275 3 pics how it...

Thanks man, it looks a bit different from mine though, but i think i've found where the mount is supposed to be, it's on the left side of the pedal (behind the part that moves) and the pedal seems to have some kind of mount that can be seen on the beginning of the video. I'm going to get a...

Thanks, just found it, here , unfortunately searching with that info etc on other sites also with P/N 8200700275 i have no idea where that fits. Gonna try to look better on the pedals again tomorrow, i see no mount behind the pedal for that for a spring that supposedly is to make strenght to...

Hello, I'm trying to find where's the spot that the spring fits since it fell out while driving and i'm not seeing any clear spot where it was mounted, does some1 here have a dci that can check pls ? It's an 04'. The spring is equal to this one: Filmed a little video to see if someone can...

Oh... so it's definitely more work than i was expecting, reprogramming the ecu. Thanks for the advice i guess :) Sent from my Redmi Note 5 using Tapatalk

Is there any guide to install a rain sensor on an 04 dci ? Like, what would i need? what connections? Sent from my Redmi Note 5 using Tapatalk

Hello guys, problem solved as @Brigsy said above, problem was the contacts between the pins. Today i took the boot trim again, used a drill bit for sanding and sanded both ground terminals on each side to the metal, problem persisted the same, when taking out the driver's side ground with...

Bend to the point the top pins touch the bottom pins?

Video here: Sorry for being a noob but i opened up the car plug and cleaned and sprayed the best i could, problem is still unchanged on either plug even if i change the housing... if i take the lamps off the problem is not there. Plug is f'ed? Or is it the housing?