Search results

I have a rather old set of H&R coilovers sitting in my garage. They were on my cup a couple of years ago but I had to take them off due to one of the shocks leaking. Does anyone know if there is anywhere that can refurbish these for a reasonable price? I'm wanting to put them back as I'm...

Would 195/55/R15 Toyo R888's fit on Williams wheels that are fitted on a 172?

Every Thursday night these 2 are parked there in disabled spaces around 7o'clock Anyone?

I'm sure someone was able to get hold of the RenaultSport steering wheel decals from 172/182's but I've tried searching and cant find it. Anyone?

Anyone have an opinion or any experience with these? Compbrake @ £145 AST @ £161 K-tec @ £171

Dont suppose anyone with coilovers has had their geometry set up for fast road and happens to have the print out? I'm getting a 4-wheel alignment done this week but I'm worried that unless I provide them with settings they'll just use the standard setup.

After fitting H&R's the steering has messed up. When turning one-way (when nearly on full-lock) the steering goes really light and get's stuck and doesn't straighten up by itself. When turning the other way the steering is really tight and springs back if you let go of the wheel. I know the...

Where's the best place to buy some from? I know K-Tec sell them but they seem over-priced. Demon Tweeks sell them here http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=ROAD&pcode=EIBE5.81250K&app=Y but it says theyre only for clio's up to '98. Are mk1 clio's use the same fitment...

Fitted some H&R coilovers today and took it straight out for a test drive... The steering seems incredibly light and in parts I seem to have lost alot of feel. (Now, when I took the top mounts off I cleaned the bearings up and sprayed them with 3in1. Just wondering if this could have anything...

Is there anything else that can be used instead of a c spanner to adjust H&R coilies?

Right, I think I'm going to bite the bullet and finally get a machine polisher and some other cleaning stuff. I've got the following added to my basket at the moment from i4detailing: Valet PRO Artemis Wax Seal I4D Uber Premium Drying Towel Kestrel DAS-6 Dual Action Polisher Lake Country...

About 1o'clock today 03 plate cup with a baby seat on the rear bench. Didnt see a sticker. The plate was something like M?03 HTA Anyone?

Obviously the 182 doesnt have a spare wheel well but appart from that are they identical? I mean in terms of the lines/contours of the boot. Anyone?

Right, I've used AG SRP on my car and I've managed to swirl the paintwork to f*ck with it, so the time has come to buy a machine polisher and some shizz to go with it. I've got around £160 to spend so I was looking at the Kestrel DAS-6, and the kits that CYC and i4detailing do with them. So...

A few pictures of todays work. ;)

The noise is getting progressively worse. Just a sort of faint nock/creak at low speeds pulling away as you lift the clutch, when braking and turning. Anyone got any ideas? Cheers Dave

http://www.break.com/index/volkswagen-blows-away-bmw-z4.html Youre welcome to shoot me down if its a repost! :)

Been after a set of these for a long while. Fittted them yesterday - was more of a ball ache than I thought! Theyre comfy as tbh, so much more fun to drive the car now. I'll get some better pics later, but here's a sneak peek for now...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESELX:IT&item=300311269795 Good seats.

I've got a set of Pole Positions on the way. Now, I've got side mounts... I just need the base mounts/subframe thingys. I spoke to Capital Seating and theyve quoted £220 for 2 base mounts which seems quite steep to me. Also concerned that the seating position will be too high as I want it a...

Anyone on here? Parked in the blue multi-storey tonight.

I bought some cams from 'Impey' on here a while back advertised as catcam428's. I checked them when they arrived and saw that the camshaft said 428 on it. Now I've just got them out again to have a look and 1 of them says 421, where as the other says 428?!?! Help?! :( Heres the pics:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESELX:IT&item=300298565370 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESELX:IT&item=300298565602

RSTuner keeps coming up with this fault. Any ideas?

Anyone care to shed some light? Big job or..?

I've got a spare set of 15's sitting in the garage. Anyone use them? What are they like weight-wise compared to turini's for example?

http://cgi.ebay.co.uk/Clio-172-182-Throttle-bodies-Jennvey-manifold_W0QQcmdZViewItemQQ_trkparmsZ66Q3a4Q7c65Q3a10Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem310125951647QQitemZ310125951647QQptZUKQ5fCarsPartsQ5fVehiclesQ5fCarPartsQ5fSMQQsalenotsupported Opinions on these from those...

2 standing tickets. Just asking for what I paid - £100 delivered. Gutted I cant go ;(

Anyone?

These any good? How do they compare to brembo Max/HC?