Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
believe it or not i replaced the full engine loom in the end with the relay boards and new relays,
the car immobilised itself by unpairing with the key, touch wood it seems fine, got croft next month so suppose ill find out if the car lets me finish a full trackday without breaking 🤞
its only actually 2 of the small brown relays that could cause this issue, middles ones for the starter and the right one is for the immobiliser
the one on the left is just fan low speed. see pic -
anyway lost my rag with it last night and ive got 90% of the loom out to check / replace.
will...
fettled round with the fuses the other night, changed the green 30 amp again, this time no matter how much i moved the relays the car still ran fine :ROFLMAO:
something seriously irritating with this..
vid attached..
99% Sure its gunna be a broken wire as its extremely intermittent. just not sure why its not holding any charge at all.
did some digging, stripped back some tape from the white plug to the strut tower as it didnt look original tape.
found this wire bodged.. A3 In the plug if anyones any ideas...
when the car did run (literally the other night)
this is what was happening, soon as i touched the relays. makes me wonder if theres a knackered wire or terminal? but could this cause a power drain as its dimming all the lights and sapping power out the battery...
hi guys, okay had major issues all caused by myself taking the car to a cowboy for itbs to be wired in..
anyway i digress..
since then i have managed 2 half trackdays.
the car ran extremely fuelly on both days and wouldnt start immediately after running. would just crank and then back fire, At...
Hi guys, need some help,
currently on with wiring in the ATPower itbs.
got the TPS on the rail on the ITB themselves pictured.
ive been supplied a plug with the wrong end somehow, this plug has the correct wires out the piggy back ecu, but isn't correct for the sensor,
joys of buying used i...
can anyone help me out, looking to wire in a typhoon piggyback ecu to my 2004 clio 182.
i have the diagram off typhoon but i need to find the pin diagram for the oem clio renault ecu?
cheers in advance.
Yeah mate its a goodun. Currently in bits gettin a new hub and wheel bearing, needs coilovers and other bits sorting as well ready for more trackday abuse
Sent from my iPhone using Tapatalk
Need to update this more, sourced some new daily wheels, to replace the 16” team dynamics it came on…
15x7 ET38 Speedline 2118s, wrapped them in Rainsports which ill be honest dont live up to the hype, shouldve gone for PS3’s..
will get some more pics up, hopefully when i sort out my Tapatalk
Thinking this is the only thing it can be tbh. Im gunna check the crank sensor as ive been told the terminal could be rusty.
Every specialist ive asked so far has said one of the components ive already changed… need to find someone who has clip, hopefully this will be a bit more informative than...
good morning guys, to keep this updated ive changed a few more bits and still no change, before i get any ''take it to a specialist'' im not too bothered its a trackcar so its just consumables that will no doubt need changing anyway in the future..
tried the lambda swap, car ran horrendous, so...
attempt at pic upload, from cadwell park last week -
car was faultless apart from losing a gearbox end cap bolt, which has now been sorted ready to go again next month.
To update this, so far changed spark plugs and all 4 injectors prior to doing cadwell, got to leeds from preston on the M62 and the EML started flashing again, this was sat on cruise at 70mph
Wasnt going to let it stop me and ruin the day as it wasnt losing power / missfiring.
Car got a good...
yeah decat, im sure its mapped as its never flagged up eml like usual,
just guessing its gunna be trail and error cause it doesnt actually cause any running issue, ill start with spark plugs first.
although i will do a diy flow test tonight and see if theres any difference in flow from the...
yeah mate, got a clio for a cheap track car but they never are, typical french cars lol.
still got an M3, id just rather track a clio for the consumable cost difference.
all injectors read between 15-15.5ohm..
coilpack was loose for some reason bolted to the inlet, could this cause an earthing issue to that? tightened it regardless.
had another read through reciepts last night and it had a full set of injectors in 2016,
Afternoon guys, ive read up a few topics just want to see if theres any other suggestions..
When out for a spirited drive or even after a few motorway miles the EML in the bottom right hand corner starts flashing. Im hoping its stored a code so i can check tomorrow at work but some times it...
Hello guys, got myself another Clio for hopefully a bit of cheap trackday fun.
Artic Blue 182 Cup pack.
Anyone know anything about the car?
Goes quite well and has a few decent mods.
Recently fit a new pair of Corbeau Pro series seats.
Got some 15” team dynamics with pirelli trofeo...