Search results

Not a Clio but my car. Discovery 3.9 v8 auto 2inch lift Centre sliencer delete 2+ front shocks 5+ rear shocks Removed anti roll bars Steering guard Diff guard Cranked rear arms Rear spring dislocation kit. Et 8 mod wheels/ Insa turbo Sahara tyres

I used to take my 1.2 Clio to Curborough every month with sprint and track day ( you can find them on Facebook) was great fun. Brilliant track and you will be surprised how close your times will be to rs clios. Sadly I no longer have my Clio but looking at getting back into it.

Seems odd that a wheel is sticking out more then others. Is the off set of all the wheels the same? Like is there wider rears to fronts maybe? Or maybe your rear beam is bent? Adding camber will help yes. Easy to do on clios.

I had a 53 plate billabong loved it!! Loads of options I had mine low on Porsche wheels with a 182 rep exhaust. Sadly now scraped.

No wasn't to loud at all was just prefect. Popped and banged on over run and was silent on the motorway at 70mph. Don't sound as good as my current car tho 3.9 v8 haha

Probably the best way of getting the paint looking good that way if you want to do a sports rep you can get any color bumpers and go over them. 182 exhaust was great had a 200 cell sports cat fitted as well. all done by pro speed in Cardiff. Was expensive tho at like £500. Didn't sound like 1.2...

With the body work if It was my car I would do all the filling on the body work my self. Then get it wrapped or get it plasti dipped. Would be a lot cheaper then a re spray. Could get it any color you like even matte finish or gloss. If you don't want to go mega low go for some motor sport style...

Porsche wheels on a clio is possible I had Porsche teledials on mine I loved them. Had h&r adapters. Problem with Porsche twists is I think they only come in 17". looks a bit silly on a clio also the tyres will have to be like rubber bands. Will have to be silly low to look good and will be...

Not a clio but it's nice and dirty!

Have an old sale post here has piks and info. http://www.cliosport.net/threads/pro-speed-clio-1-2-16v-182-style-exhaust-with-pearl-black-182-bumper.726396/ Say £300 for it

I have one made by pro speed and I'm selling it I'm in birmingham. Comes with a 200 cell sport catalytic converter and a pearl black bumper cut to fit as well. Let me know if you want it. Sounds awesome!

Probably easier to grind down the caliper a bit.

I've put shims on my clio with drums it's easy. Jack the car up take off the wheel. Then just undo the 4 bolts on the back of the drum (don't drop the drum when undone) then put the shim between the rear beam and drum and tighten back up. You don't have to take the drum apart or anything.

Camber shims for a sport will fit a non sport with rear drums. Easy to fit just jack the car up remove wheel then the drum comes off by undoing the four bolts at the back. The shim goes between the drum and rear beam. Washers will do the job but a little dodgy.

This was the back before custom springs. Still had adjusters and cups in wound all the way down. There was a good bit of arch gap still.

the rear had corsa b 90mm springs and the front had loads to go down and still had the helper springs in.

Mine had ta coilovers they go very low at the front mine still had another 50 or so mm to go. The rear springs are crap for lows tho need custom ones for good lows.

I had these ones where a good bit of kit come with all the bolts you need. Do lots of measuring to make sure you buy the right size spacers. You don't want to spend loads then think I wish it was 10mm wider either side...

I could do Multistory car parks at 80mm with a little scraping so 40mm will clear easy.

5th time I've taken it to curborough sprint and it's always awesome fun!

40mm will be fine I'm running Eibach sportlines witch are around 45-50mm and are fine getting around. I've also ran coilovers at 80mm and it scraps some times and also been lower then 100mm that's when you really struggle!

1.2 power ftw haha

mine are dubmeister plates

If your doing it your self they have some of the exhaust vavles on eBay search: exhaust control valve. Or you could go to pro speed in Cardiff they do custom exhaust with butterfly vavles and also make custom intakes.

Looks really good nice work!!

G23 adapters look really good. Looks like they sell them as all for not just pairs. http://www.g23engineering.com/products/custom/traditional-threaded-adapter.html

I used hub adapters to put porsche teledials on my clio. Best thing to do before you buy the adapters is jack the car up and sit your new wheel on the hub and measure out to the artch. You might find you need 25mm spacers or evan 30mm to get it to sit nice. Better then spending loads of money...

Love land rovers! Been helping my bro build this beast. Disco 300tdi tray back.

I ran mine at 32psi and never had any problems just need to keep and eye on them.

I've got them in 195/50/15 and love them they feel awesome in the dry. Could feel they were a little slippy today in the heavy rain but still good. Definitely worth the extra money over normal tyres.