oil

Right, about four months ago after much debating i purchased some "cheap" coilovers from ebay as I didn't like the way my clio looked or drove as I felt it rolled too much in the corners. I didn't want to spend an awfull lot as at the end of the day it is still only a 1.2. After a bit of...

Those of you running BC Racing Coilovers, out of interest what dampening settings are you running and for what sort of driving? Road/Track etc. Cheers, Dan

Evening guys Just seeing if anyone is running Gaz Gha coilovers on track, and what their thoughts are on them. Just weighing up my options, will only be doing the odd TD now as have a new edition on the way so sort of on a budget to Cheers in advance scott

Sorry in advance as this is a bit random and probably quite a daft question for a correct answer but thought I might as well ask the experts. I had car (05 182) in tyre place last week and when it was up in the air we noticed a fair amount of engine oil splashed back all around the passenger...

Got 5litres lying spare from my Impreza. It loves it but anyone use it in a stock F4r? Everyone's opinions on oils differ usually, so that's why I'm asking. Most of these oils weren't available when these cars were designed, so I don't need to know what Renault recommended at the time. What...

Cheapest place for these or should I just go a Renault main dealer? and does anyone know how much Renault charge?

Yesterday my oil pressure light and stop light came on. Took it to the garage and had the pressure sensor replaced, which didn't fix it. The mechanic recommended an engine flush, new filter and oil. He put the flush in and took the oil filter off but the oil filter was dry. He said that...

Hi all. Was driving today and all of a sudden the oil pressure light and stop light came on. Oil level is good, as is temperature (sitting between 2-4 bars). Can't say I've noticed any change in engine noise, but when you're concentrating it you just never know! Lights only come on above...

As per title, on re-building an engine has anyone blanked these off and re-assembled the engine without issues? A couple in my block will have to be machined out and am concerned in loosing the interference fit for replacements. For years engines didn't have these and I am wondering if there are...