12x12" of 3m carbon vinyl what should i do ?

[chrism09]

As above i have already done my badge`s front and rear and hazard panel so what next i was thinking the bullets but would be quite hard due to the 2.0 16v and would not be perfect .

Ideas and pics welcome but remember i only have 12"x12"

 

[yellowbelly]

As long as the sheet is heated up doing the bullets shouldn't be a problem, keep heat on it to prolong the 'play' time.
other than that, the usual like gearstick and steering wheel inserts.

 

[chrism09]

i just dont think i would get it perfect. i have done it before but i dont know how it would come out might give it ago and i really dont want to do the gear or steering wheel parts as i like them the way thay are

 

[chris powell]

some ideas for you mate!!

http://s1179.photobucket.com/albums/x388/chrispowell2/

cheers

 

[chrism09]

cheers mate al have a look i did the bullets but still got some left over

 

[chrism09]

chris you must have spent a few quid on all the carbon ! nice work

 

[chris powell]

yeah i purchased so much they started offering me discount!! haha

 

[chris powell]

just one quick tip DONT HEAT IT TOO MUCH

when it cools down it shrinks back and goes a bit hard(can be re heated tho)

 

[chrism09]

just one quick tip DONT HEAT IT TOO MUCH

when it cools down it shrinks back and goes a bit hard(can be re heated tho)

Yeah ive done a few bits already (ps controler etc) and read up on how to do it etc

Ive did the front and rear dimonds a couple of weeks ago but today i ended up doing the bullets which was easyer than i thought .

Ive still got some left so might do the dimounds on the wheels like you have done do thay just pop off or is it a sillicone back on job?

 

[Chris_786]

Where's the cheapest place to buy the 3m stuff from?

Cheers.

 

[chris powell]

the wheel diamonds come off the same as the rear diamond

they have 4 heat welds on them just gently cut the weld and they will tap out mate.

 

[chris powell]

i get my stuff from

http://cgi.ebay.co.uk/150x120cm-Gen...arts_Vehicles_CarParts_SM&hash=item4ced9a89f1

if you contact them they can do you any size you want but it can only ever be 120 cm wide as thats the width of the roll

hope this helps

ps always make a lower offer they always come down on the price!!!