172 / 182 Throttle Pedal Wiring

[Wired]

Evening guys / girls / other,

I don't suppose anyone has the pinout for the late 172 / 182 throttle pedal?

I seem to have Pin 1 and 2 as grounds, Pin 3 as signal 1, Pins 4 and 5 as 5v+ and 6 as the second signal, but I am not sure I trust my notes and can't get on autodata at the moment.

If anyone could help me out I would appreciate it hugely, thanks!

 

[Wired]

If anyone ever searches and needs it, I've included the throttle body as it's related.

Pedal:
Pin 1 Sensor Ground 2, ECU Pin 75
Pin 2 Sensor Ground 1, ECU Pin 87
Pin 3 PPS Signal 1, ECU Pin 14
Pin 4 +5v Reference 1, ECU Pin 6
Pin 5 +5v Reference 2, ECU Pin 71
Pin 6 PPS Signal 2, ECU Pin 43

Throttle Body:
Pin 1 TPS Signal 1, ECU Pin 17
Pin 2 +5v Reference, ECU Pin 7
Pin 3 Motor +, ECU Pin 61
Pin 4 TPS Signal 2, ECU Pin 14
Pin 5 Motor -, ECU Pin 62
Pin 6 Sensor Ground, ECU Pin 82

Cheers!

Tom,
Hardwired Performance

 

[barnesautos]

Yeah , you got my reply I see on FB


Sent from my iPhone using Tapatalk

 

[Wired]

I haven't been on Facebook, I pulled this off autodata this morning.

Are you the chap who offered an ECU base map yesterday? Having trouble with one from the ECU dealer. If so, thank you 👍

 

[Wired]

Autodata pic attached below, bit more typical of normal wiring diagrams than the Renault version it seems.

 

[barnesautos]

I haven't been on Facebook, I pulled this off autodata this morning.

Are you the chap who offered an ECU base map yesterday? Having troubled with one from the ECU dealer. If so, thank you [emoji106]

No wasn’t me .

Just mistaken you prob for someone else on FB .

Saw a post asking the exact same question.

Must be common lol [emoji38].

Hope you fixed the issue.


Sent from my iPhone using Tapatalk

 

[barnesautos]

Autodata pic attached below, bit more typical of normal wiring diagrams than the Renault version it seems.

Yes I see no mention of it going through 3 other connector blocks [emoji2357]


Sent from my iPhone using Tapatalk

 

[Wired]

Haha fair do's, either way, between your pic and mine and the pinouts, hopefully this will save some questions in the future.

All the best 🙂👍