Thats 4thQuote: Originally posted by Cuppy 172 on 11 November 2003
Should be looking at over 100 mate, your car is fcuked
Not on your life...Quote: Originally posted by Cuppy 172 on 11 November 2003
Should be looking at over 100 mate, your car is fcuked
Well is it revving all the way round to 7250rpm or is the limiter cutting in early???Quote: Originally posted by Klang1.6 on 11 November 2003
IF I CAN ONLY GET 80 WHAT CUD BE WRONG
Not really...Quote: Originally posted by Jon1978 on 11 November 2003
I think that the good Cup/ bad Cup debate is about to start again.
Dont forget that there is always (no matter how small) an element of speedo error and this can (& does) vary between cars, so what you see as an "indicated" 90mph in your car may not actually be a "real" 90mph and its only going to go as fast as the revs/gearing will allow...Quote:
I have done the suggested run-in period of 625miles in my 53plate Cup, and since then have stretched her legs a bit, and I can get well over 90 in third gear.
Pete, I know you said your redline marks on the rev counter were lower than on my Cup when we were at pod, but does it not still rev to 7250rpm?!Quote: Originally posted by pete on 11 November 2003
On the q_mile a pod I was just changing into 4th at 89mph just a few yards from the finish and mine R-lines at 6800
Quote: Originally posted by Chris nnic on 11 November 2003
Im in the same boat. just have to change b4 the end...but at about 95mph
Its true mate, and the mk1 can go marginally faster in gear due to longer gearing...Quote: Originally posted by broadbean on 12 November 2003
My old mk1 v6 chipped would do 90 in third,so i find it hard to believe that the 172 and cup doed this aswell,cheers
Not even if you use all 9,000 revs? That 2nd gear must be short then!Quote: Originally posted by Rich-D on 12 November 2003
The V6 has closer ratios being a 6-speed box, so cant go as fast in gear and I know a CTR wont hit 60mph in 2nd gear as another example of close 6-speed gearing.
Yeah, they are very close ratiod but they dont rev that high as standard...Quote: Originally posted by Frosty on 12 November 2003
Not even if you use all 9,000 revs? That 2nd gear must be short then!