ABS and CV Boot Help

[tomj]

Hi

Got my clio phase 1 sport on friday and I'm just doing a few things before mot,

First of all the front drivers side cv boot has split so need a new one, where from??

Second the abs was kicking in at low speed , looked at the drivers side abs ring and it has a tooth missing? Again where can I get one from and how hard to change??

Thanks in advance

Tom

 

[Dave Hester]

Go to your local motor factors and buy a stretchy universal cv boot and a fitting cone. Its only a 2 hour job, drivers side shaft just slides out the gearbox without losing any oil so its the easiest side to do

 

[Darren S]

Or if you don't want the hassle/haven't got the tools to hand - expect around £140 for the job to be done at a dealership. Obviously, cheaper elsewhere of course.

D.

 

[Fred@BTM]

just stick a new driveshaft on it

 

[tomj]

Ok got the parts from a local motor factors, what size nut is on the hub?? My teng tool kit only goes to 21mm :/

Cheers

Tom

 

[Fred@BTM]

30mm and you need a torque wrench that can do 275nm

 

[tomj]

30mm and you need a torque wrench that can do 275nm

Yeah got the 30mm socket on , tried a short one and a long one but keeps slipping off??? Might leave it with the garage to do :/