Advice! Pushing the button today on new Coilovers.

[Nathan105e]

I'm pushing the button today on a new set of coilovers!

Cars a track car with a once a month road drive just to keep things free!

BC Ds Coilovers with a choice of springs, swaying to either 9/8 or 10/8 with there use of top mounts.

Or Spax 750 Motorclub coilovers from Ktec, with the only springs they sell which are 740lb fronts and 450lb rears. but I can use my pure motorsport top mounts and strut brace! And I can set the camber on the struts.

I know the Bc get good reviews but is that from people who use them on road the majority of the time!

Any opinions appreciated, sadly AST are out my budget or this thread wouldn't exist 😭

Links...

BC Racing DS Series Coilovers - Renault Clio Mk2 RS172, RS182

Please note we are unable to ship the BC Racing range to the following countries: France, The Netherlands, Finland, USA & Canada, China, Singapore, Taiwan, Japan, Malaysia, South Africa, Australia. If your country of residence is on this list then you ha

www.kamracing.co.uk

KTR Clio 2RS Race Coilover Kit - 750 Motor Club Spec - Renault and Renaultsport parts and fitting by K-Tec Racing

KTR Clio 2RS Race Coilover Kit - 750 Motor Club Spec by SPAX from K-Tec Racing Renault

www.k-tecracing.com

 

[JamesBryan]

The rears on the Spax will be a lot stiffer than the BC's with them being a true coilover setup.

The spring rate on them equate to 13kg/8kg. With the rears being a true 8kg rather than the BC's which is more like 4kg because of the inboard spring setup.

 

[Nathan105e]

The rears on the Spax will be a lot stiffer than the BC's with them being a true coilover setup.

The spring rate on them equate to 14kg/8kg. With the rears being a true 8kg rather than the BC's which is more like 4kg because of the inboard spring setup.

I did a little reading on that last night about how it changes it, I just can't decide which to go for, I currently have the normal Spax rsx, but seem a little too soft up the front (342lb or 6kg)

 

[JamesBryan]

I did a little reading on that last night about how it changes it, I just can't decide which to go for, I currently have the normal Spax rsx, but seem a little too soft up the front (342lb or 6kg)

Yeah you want it stiffer than that on the front.

The 750mc spec ones seem decent from what i've seen and the cars in that championship are flying to be fair.

 

[plenty]

If it’s a true 8 kg rate at the rear, the car will be undrivable on the road but if it’s a pure track car that might not matter.

 

[cp1991]

I use avo coilovers on mine and so far Ive been really impressed by them. I think they're the gtx but now called race 1. I only use it on the road though. They're Quite stiff but absorb bumps great.

 

[Kev@KAM]

If its a monotube rear coilover I'd be happy with an 8kg spring. My Tractive coilovers are 600lb springs on the back and I can happy drive that to a circuit. A- Roads are interesting but not terrible. With a twin tube setup it would suck ass though...

 

[Kev@KAM]

I use avo coilovers on mine and so far Ive been really impressed by them. I think they're the gtx but now called race 1. I only use it on the road though. They're Quite stiff but absorb bumps great.

AVO's new kit is the RT. I custom spec these for full on track use. Personally I dont favour the Spax or GAZ setups as a monotube you can go softer on the front than the rear. I run 500lb (9kg) front springs,600lb (11kg) rear. With good valving it works. I've got a few customers running similar on the AVO. With full slicks you'd probably want stiffer at the front but I like a little bit of compliance for kerbs with road legal motorsport tyres.

The AVO use a compbrake style top mount as standard so you'd be able to swap to your PMS one.

Avo RT Coilovers - Renault Clio Mk2 RS172 / RS182 (ALL MODELS)

This kit for the Renault Clio Mk2 RS has Avo’s mono tube designed shock absorbers front and rear. They are the most suitable for fast road and competition use The standard kit comes with 400lb front and 225lb rear springs. The additional strength provided by the inverted insert along with the...

www.kamracing.co.uk

 

[Nathan105e]

AVO's new kit is the RT. I custom spec these for full on track use. Personally I dont favour the Spax or GAZ setups as a monotube you can go softer on the front than the rear. I run 500lb (9kg) front springs,600lb (11kg) rear. With good valving it works. I've got a few customers running similar on the AVO. With full slicks you'd probably want stiffer at the front but I like a little bit of compliance for kerbs with road legal motorsport tyres.

The AVO use a compbrake style top mount as standard so you'd be able to swap to your PMS one.

Avo RT Coilovers - Renault Clio Mk2 RS172 / RS182 (ALL MODELS)

This kit for the Renault Clio Mk2 RS has Avo’s mono tube designed shock absorbers front and rear. They are the most suitable for fast road and competition use The standard kit comes with 400lb front and 225lb rear springs. The additional strength provided by the inverted insert along with the...

www.kamracing.co.uk

Il be dropping you a phonecall shortly Kev!

 

[Nathan105e]

I didn't push the button due to a reccomended coilover I've not even looked at until now.

Kevs advice was second to none and talked me through all the options, reccomnded the Avo's in the end . Does anyone have The current RT'S as a review point, it's put a right spanner in the works as I've over looked them from previous bad reputation.

If anyone's using them what we're you using prior?

 

[timmy_liang]

如果它是真正的 8 公斤後部，那麼這輛車在路上將無法駕駛，但如果它是一輛純軌道車，那可能就無關緊要了。

打擾一下
Avo RT Coilover 的前後彈簧分別是多少磅？

 

[timmy_liang]

我很快就會給你打個電話，凱夫！

後彈簧比前彈簧硬嗎？

 

[Krarl]

Bruh

 

[timmy_liang]

我最近還訂購了一個 AVO，Kav 還問我需要多少彈簧磅，我很頭疼，因為我擔心後部在 225 磅時會太弱

 

[Mr Squashie]

哥们

EFA