**Alloy experts**

[Jat_172cup]

Well you hardly need to be an expert but can someone just re-assure me that these alloys will fit the cup please? Im going a long way to get them...


7" Wide Alloy
PCD 100 x 4
Offset is ET37

Oz Superlegerras 15"

Thanks people

 

[rich-6]

Yes, Identical fitment just an inch smaller rim,

You'l need to knock the spigot rings out and fit ones to bring the CB down to 60.1 unless they have ones of that size fitted already, They won't cost more than £10 though

 

[Jat_172cup]

Cheers Rich

 

[biojo]

silly qustion but do 15" fit over the front calipers?

 

[Greeny.]

silly qustion but do 15" fit over the front calipers?

Yes, ph1's had 15's remember

 

[Jat_172cup]

Anyone already got the above on? Im putting some r888's on them too..

 

[rich-6]

I've got superleggeras but they're 16"

 

[Struggler]

so long as the centre bore isnt too small on the wheels!
otherwise you'll have to have them bored out

 

[Jat_172cup]

They have been fit on a Corsa and a Micra...anyone know the bore size on those?

 

[rich-6]

They have been fit on a Corsa and a Micra...anyone know the bore size on those?

Refer to post #2

Theyre machined at the factory at around 70mm

 

[Jat_172cup]

Ah i get you, so I can take the spiggots off the super's that I have got now