Currently repairing a cat c Clio for the wife. It only had a light tap at the front, no airbags deployed, but after plenty of reading on this forum and google etc I understand there could be numerous faults with pretensioners etc. I have cut out switches ect under seats and used resistors 3.3 under seats and 3.9 in steering wheel etc. I have also put a replacement module under the drinks holder and still getting the airbag/serv lights staying on the dash. I'm thinking the impact sensors along the sills might of had it or the squib, only 2 areas left.(or the replacement module might have an error code as it was 2nd hand so 3 areas) My problem is that the Clio is not on the road yet (bit of paintwork left which ill do in the next 2 days as i got a week off work but shes ready for mot apart from airbag light) so I have to have any diagnosis done here at my house. There's plenty of mobile diagnosis people around at cost but none with clip or any1 that specializes in Clio. I'd rather pay some1 that specializes in this area than some random mobile diagnosis who gives me fault codes then I replace bits n bobs and then still need some1 with clip probably to sort after parts have been replaced ect. If there is any1 here that can help it would be much appreciated, I'm happy to pay traveling, time, skills ect just need this problem nipped in the but as its knocking the wind out my sails a bit. Pls help also there is evidence the airbag light fault was there before the light tap as I found some wires/fuses/resistors under the cup holders so it looks like some1 was going to try something.