ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
Due to ongoing maintenance work some features and functions (including Dark mode!) may be unavailable or visually appear differently.
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
best splitter
- Thread starter Tom Wilde
- Start date
172 Cup
#3 FTW
titanic killer
1 - Cup splitter
1.Slow
^ Got that one too, looks much better than the fat one!
Marky_
ClioSport Club Member
182
v6
Try Specialist Renault Breakers, www.renault-spare-parts.com, tel: 01254 386661, that's where i got mine from.
It's from a mk1 ph2 megane (1999-2002), part number 77 00 426 531, £25+vat(ish) .
It's from a mk1 ph2 megane (1999-2002), part number 77 00 426 531, £25+vat(ish) .
Do you have to modify it/ mess about much to fit it on? I assume you put it on a 182?....
Really want to avoid paying the silly money Renault want for the standard one!....
Dynamique 1.4 16v
Hiya,
Sorry to jump on the tread! I have wanted a megane splitter for ages just verytime I try to get one nobody has them! Thank you Greg called your renault people and they have stock £25 + vat delivered within 2 working days!
Anybody got some tips for removing the std splitter from a 1.4 and fitting the new megane one? I know I will have to cut it down but tips would be great!
Thank you
Sorry to jump on the tread! I have wanted a megane splitter for ages just verytime I try to get one nobody has them! Thank you Greg called your renault people and they have stock £25 + vat delivered within 2 working days!
Anybody got some tips for removing the std splitter from a 1.4 and fitting the new megane one? I know I will have to cut it down but tips would be great!
Thank you
v6
I took the bumper off to fit mine (much easier access but a bit excessive), would be easier to jack up the front and put it on axle stands.
The megane splitter is just about the right width but too long on the ends, so no bending required really (a little at the corners but i didn't need to modify it) just need to chop off about 3" from each end (I used a junior hacksaw after i'd fitted it).
To actually fit it i got lots of self-tapping screws from B&Q (can't remember the size but only need to be 1cm long at most), about 30 of them for £2-3.
Line up the splitter and attach loosely with masking tape. Using a 1-2mm drill bit, drill a pilot hole throught the splitter and bumper (i started in the middle of the splitter) and screw in a self tapper.
Continue every 6" or so, can add more screws anywhere it's not fitting quite right.
Saw off ends, et voila!
EDIT: Was a while ago that i did this, so ask if I've missed something out!
The megane splitter is just about the right width but too long on the ends, so no bending required really (a little at the corners but i didn't need to modify it) just need to chop off about 3" from each end (I used a junior hacksaw after i'd fitted it).
To actually fit it i got lots of self-tapping screws from B&Q (can't remember the size but only need to be 1cm long at most), about 30 of them for £2-3.
Line up the splitter and attach loosely with masking tape. Using a 1-2mm drill bit, drill a pilot hole throught the splitter and bumper (i started in the middle of the splitter) and screw in a self tapper.
Continue every 6" or so, can add more screws anywhere it's not fitting quite right.
Saw off ends, et voila!
EDIT: Was a while ago that i did this, so ask if I've missed something out!
Last edited:
megane one, the bigger one, im sure someone can let u know the year model etc its off
Fletcher
ClioSport Club Member
Ktec CF one imo
Standard splitters usually just stapled on so just go round and pull them off
