Blow torch

[DomP182]

I need to get a blowtorch to free up caliper bleed nipples, which gases get hotest or rather which would be best for this purpose? Any recommended torches

 

[Matt e]

Vortex MAP Torch Pack

This MAP torch set from Vortex has everything you need for blowtorching and metalworking jobs such as solder joints. The pack comes with three soldering nozzles so you can easily adjust the size of the flame depending on the surface area or thickness of the material you're heating. Since it's...

www.toolstation.com

 

[MRBILLYUK]

No need to spend a fortune, I've had one of these for years , used for soldering copper pipes. Cheap replacement cartridges.

https://www.amazon.co.uk/dp/B0017RMJSG/?tag=cliospnet01-21

 

[DomP182]

Thanks I'd looked at similar ones to those but got my usual indecision, I regularly find myself needing to do bits of plumbing to fit kitchens but have used either compression or push fit so it might be a better idea to get the more capable one. Soldered joints not only look better but are generally safer

 

[MRBILLYUK]

Thanks I'd looked at similar ones to those but got my usual indecision, I regularly find myself needing to do bits of plumbing to fit kitchens but have used either compression or push fit so it might be a better idea to get the more capable one. Soldered joints not only look better but are generally safer

I've soldered lots of joints, gas and water with one of those I put up a link up fot , they're good for finishing off creme brulee too

 

[B-shaw557]

No need to spend a fortune, I've had one of these for years , used for soldering copper pipes. Cheap replacement cartridges.

https://www.amazon.co.uk/dp/B0017RMJSG/?tag=cliospnet01-21

I have one of these
if something is truly siezed it will not get it anyehre near hot enough, theyre just not up to the job.

What Matt posted would be far better, ive been recomended it by a few people now.

 

[DomP182]

Just when I thought I'd decided which to get, thanks though.

 

[Ol’ Tarby]

I've got the same one from the Amazon one above. It's not failed me yet

 

[Brigsy]

Vortex mapp torch gets the vote from me, they are great. The mapp flame is a bit hotter than your average blowtorch, which can help in some situations.

 

[lemonnobby]

Mapp gas is great.

 

[Soot1e]

I've soldered lots of joints, gas and water with one of those I put up a link up fot , they're good for finishing off creme brulee too

Use my blow torch for creme brûlée as well, plus the usual plumbing jobs and seized nuts and bolts.