ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Boot install questions

aucky

ClioSport Club Member
Car  N
Im going to be building a false floor and i was wondering if this bar accross has any purpose? Also what size torx bit is needed to undo the bolts?
28042009182.webp
 
17mm socket would be better to take the bolt out pal. Just put the bolts back in after you have taken them out or you will have two holes showing the road lol.
 
17mm socket would be better to take the bolt out pal. Just put the bolts back in after you have taken them out or you will have two holes showing the road lol.

Yeh, good earth point too if you sand down the paint to metal. I run nearly 400amps through this earth point :P thats 2 runs of 4 guage going to each side.
 
be careful not to snap the bolts if its an older model. having direct contact with the road means mine were abit rusty and very fragile :(
 
Back
Top