Bulletts And Splitter

[ashman01]

OK im stuck on how to get my side bullets of just the bit that says 16v in my case. and the front splitter on a 2002 1.2 dynamique can anyone point me in the direction of a guide. I have infact done a search and havent found anything any help would be muchly appreciated.

 

[Greeny.]

Bullets should just pull out if they are anything like mine on a ph2 172? I found the best way was to pull them was from the straight side of the bullet, not sure on the splitter.

 

[DMH-01]

Put something like a screw driver under the bullet and flick it off, simple.

 

[ashman01]

Bullets should just pull out if they are anything like mine on a ph2 172? I found the best way was to pull them was from the straight side of the bullet, not sure on the splitter.

Ok ill give that a go later does it come away from the long side strip? i tried pulling hard but obviously dont want to break it

 

[Greeny.]

If its like mine mate I just pull mine away from the straight side of the bullet and the whole thing just comes off, needs abit of a yank first time. Try a small flat head screwdriver with masking tape around it if not.