Camber adjustment bolts

[bigmonmulgrew]

I have a 40mm drop kit to be fitted this saturday.
On the K-tec racing site they offer camber adjustment bolts which give up to 3 degrees of adjustment. My question is are they really needed. and how are they used. Is it 2 on each side or 1 and a normal bolt on each side.

 

[Fred@BTM]

no need (seriously)

plus they're £50 (you can get the same thing for £17)

 

[valver pete]

I've got em on mine, with a 60mm drop, gives my steering a better feel & reduces the shocking uneven tyre wear i was getting. They fit into the top bolt hole between the hub and the suspension strut, using a cam on the bolt to move the hub in and out. if your camber goes out by less than 1 degree i wouldnt bother with em, a good 4-wheel alignment will tell you this.