Car skipping under load

[.Kev.]

Just been on a track day, when cornering hard the car seems to scrub/skip in the opposite direction to which you turn.

Im still adjusting the set up and was wondering if its because i have it to low (its not silly low) or to do with something else. Maybe its me pushing to hard.

Any tips?

 

[Craig.H]

more info like what tires you are running etc will help, could be loads of things including just driving too fast

 

[.Kev.]

Ive got R888's @ 30psi, FK coilies with -2.0 degrees camber, powerflex bushes, shocks set to fully stiff, ride height wise theres an inch between the wheel and arch.

Any ideas?

 

[Sheila’s’ Wheels’]

If they're on their hardest setting, there is no movement. Suspension is there to smooth out the road. If yours is rock hard, it will bounce over the tiniest little bumps.

 

[.Kev.]

Back it off a bit then, i thought it may have been due to it beeing low and the front shocks running out of travel.

 

[ben lee]

im sure r888 are meant to be running lower pressures than normal road tyres around 26psi irc

 

[Sheila’s’ Wheels’]

I used to run them 30psi hot which equated to about 16 psi cold.

 

[.Kev.]

that was the hot temp