ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Chinese alpine x100 install?
- Thread starter AhmedRSi
- Start date
Ph1 172 + Combo van
there is just plugs mate it is not hard. none of them are the same so if it fits in the hole it is the right plug. should be one into the back of the headunit then the wires should split into two bunched groups and there will be one group for power and one for speakers i think. these are like flat rectangles.
?
Richy... dont worry mate. Turned out to be a faulty light uni im sourcing a replacement. Might get back to you after ive tried the new light. But basically it was a problem with the circuit board leaving certain leds brighter than others.
But here is the wires i got with the unit (on the right) and the iso adaptor i bought to fit my car (on the left). Do i just allow the wires that came with the chinese uni and use my iso adaptor? but where is the remote lead etc for my sub/amp?
But here is the wires i got with the unit (on the right) and the iso adaptor i bought to fit my car (on the left). Do i just allow the wires that came with the chinese uni and use my iso adaptor? but where is the remote lead etc for my sub/amp?
Ph1 172 + Combo van
look in the manual for your headunit there should be a wiring diagram showing your leads that you have there and one will say rem or remote turn on or amp 0.3 maybe. that is the one you have to connect it to either by a connector block, crimp or soldering.
Ph1 172 + Combo van
... well then on the wires you are going to be using. id there any wires saying amp or rem or remote. or lone blue wires with noting on the end.
if yes then it will be that if no then you will need a wiring diagram or someone who has a chinese hedunit with that wiring to tell you if they have done it before.
if yes then it will be that if no then you will need a wiring diagram or someone who has a chinese hedunit with that wiring to tell you if they have done it before.
Suzuki Ignis Sport
Thanks!
I can't remember which wire goes where, but I'll see if i can take my unit out of my car tomorrow, and take a pic of the wires etc.
But thats only if I can get my unit out, as i haven't got the keys with me.
Suzuki Ignis Sport
I can forget.
And of course, the wires/adapters above look familiar, as its exactly what i was faced with when i recieved my Alpine X100 from the same seller on eBay. :quiet:
Suzuki Ignis Sport
Well please have a look tomorrow then
If you dont... im not a patient man... so i may just try the pink cable and see what happens/blows up hehehehehehe
Yes I know you're not a patient man. A text at 8am in the morning saying that you've recieved ur head unit was not neccesary tho!
But i'll see what i can do tomorrow for you.
Suzuki Ignis Sport
Neither were naked pics of your missus. But nice touch never the less
Even tho i'm single :S
?
Yeh justin think this iso adaptor i got does not conform to normal colouring though (cheap ebay jobby)
But im pretty confident its the lone pink one as it fits into the same connector pin as the "REMO" blue/white cable from the original wiring. Also just looked in the manual and it has confirmed the blue/white cable as remote cable.
Chinese manual ftl though.... had to download one lol
But im pretty confident its the lone pink one as it fits into the same connector pin as the "REMO" blue/white cable from the original wiring. Also just looked in the manual and it has confirmed the blue/white cable as remote cable.
Chinese manual ftl though.... had to download one lol
Suzuki Ignis Sport
Yea I downloaded an English one from the Alpine website, not hard though was it?
?
did you actually try the blue ?
IIRC either would work
pink is phone mute on alpines and blue is amp remote.
