CLio 182 Gearbox jumping out of 3rd

[marinop37]

hi guys, i have a problem with my gearbox on the 182. sometimes happens that my gear stick just jumps out of the 3rd gear. i had this issue before my gear linkage has been synced, and on almost every release of the accelerator the 3rd gear jumped out, now the gear changes are perfect smooth, but still sometimes it jumps out fewer times than before, but the problem hasn't gone.

tnx in advance,

best regards

 

[MartinR]

Worn dogbone mount?

 

[Carlv8415]

Mine jumps out of first every now and then. I have all solid engine mounts

 

[marinop37]

the dogbone mount is still in good shape and pretty stiff, when pushing and releasing the accelerator there is no mayor engine / gear stick movement.. it's kind of weird because if in 3rd and playing with accelerator it doesn't jump out, mostly occures when the car is decelerating and/or braking and when you'd hit the accelerator ot of the corner the gear would jump out.

 

[marinop37]

i also had my gearbox repaired, could it be that they didn't adjust the mounts properly ?

 

[trev92]

That was also one of my problems with my gearbox. I took mine out and sent it to Agency Transimission to have it fully rebuilt. £275 and he replaced all the bearings, syncros, gaskets, seals, hubs, circlips, reverse top plate, 4th gear and a few other bits, sent it to him on Wednesday and by Tuesday I had it back.

 

[marinop37]

yes it appears to be an internal problem.. i'll try to fit the uprated (powerflex) dogbone mount, if it neither doesn't help, then yes, i'll have to get my gearbox "refreshed". tnx for your reply i'm from Croatia so i'll have to find someone who'll make a perfect job