clio mk3 rear fogs

[daydotz]

i never relised the mk3 clio only had one wired fog light an had bulbs in both sides http://www.renaultsport.co.uk/community/forum/topic.asp?TOPIC_ID=22644&SearchTerms=fog,lights,197

 

[Alastair.]

yea thats rite, the nearside is for euro cars like france etc

 

[BioHzrd]

Your only required to have a rear foglight on the right hand side i think it is in the UK and the other ones is for Euro cars like said above...

 

[daydotz]

yea thats rite, the nearside is for euro cars like france etc

hmm im tempted to get it wired up be an unusal mod will it do much harm

Your only required to have a rear foglight on the right hand side i think it is in the UK and the other ones is for Euro cars like said above...

never knew that

 

[BioHzrd]

Been done before on the Ph2 rear lights, just requiered a feed to be run from the right had light to the left throughthe bumper....more effort than its worth....

 

[daydotz]

Been done before on the Ph2 rear lights, just requiered a feed to be run from the right had light to the left throughthe bumper....more effort than its worth....

i dont know why it just seems something id like to do

 

[willynwilson]

thanks for the PM daydotz,

i had no idea about that!

i might have to look into that this weekend, im sure it cant be difficult to wire them up!

 

[BioHzrd]

For the Ph2s it was just a single 1mm cable from one light to the other cant be much diffrent for the Mk3......You get around to getting those pics of the vent sorrounds Wilson ??

 

[Alastair.]

r u on about the mk2 phase 2? ^

 

[R1XPH]

Well PAUL I knew my car did that :rasp:

 

[willynwilson]

For the Ph2s it was just a single 1mm cable from one light to the other cant be much diffrent for the Mk3......You get around to getting those pics of the vent sorrounds Wilson ??

i will do them tonight i promise!

 

[daydotz]

For the Ph2s it was just a single 1mm cable from one light to the other cant be much diffrent for the Mk3......You get around to getting those pics of the vent sorrounds Wilson ??

i will do them tonight i promise!

an pics of clive

 

[daydotz]

the guide from renault sport

Originally posted by Mentalpen
[br]OK so don't blame me if it goes wrong....... []

so this is what i have learnt Renault have done by what i can see.

Firstly using a star headed screwdriver bit (T20) un screw the 3 screws holding in the clusters and gently waggle and pull the clusters until the holding plugs work there way out.

Now starting on the driver’s side remove the tape from both sides of the body and thread a wire through the gap. Now attach the wire to the end green wire and re-insulate the wires.

Now run the wire under the trim to the passenger side.

And back up the passenger side

Strip the tape as per drivers side and thread the wire through and tape back up.

How attack it into the cable clip next to the orange wire. (Note* you may have to remove a green bit to do so)

Now just test and put it all back together.

DONE!
[]

 

[R1XPH]

If I have some free time.

What size wire we using? Also when I undid mine to change the bulbs the self tapping Torx screws were pretty tight.

 

[willynwilson]

that looks rather interesting! i dont think my electrical knowledge expands that far!

Biohzrd: i have the pictures on my phone, just need to upload them tonight.

Daydotz: i dont want to post clive incase people think it looks poo! He isnt finished yet, i would rather post pictures when done!

 

[daydotz]

that looks rather interesting! i dont think my electrical knowledge expands that far!

Biohzrd: i have the pictures on my phone, just need to upload them tonight.

Daydotz: i dont want to post clive incase people think it looks poo! He isnt finished yet, i would rather post pictures when done!

tut i want to see in though i want to see it on 172 alloys before you sell em on

 

[willynwilson]

that looks rather interesting! i dont think my electrical knowledge expands that far!

Biohzrd: i have the pictures on my phone, just need to upload them tonight.

Daydotz: i dont want to post clive incase people think it looks poo! He isnt finished yet, i would rather post pictures when done!

tut i want to see in though i want to see it on 172 alloys before you sell em on

i cant sell the 172 alloys, so it looks like im keeping them!

so eventually you will see it in its full glory!

 

[BioHzrd]

Oh god not a Mk3 on Turinis !!!!!!!!

 

[daydotz]

Oh god not a Mk3 on Turinis !!!!!!!!

no 172 ph2 ones

 

[daydotz]

tut i want to see in though i want to see it on 172 alloys before you sell em on

i cant sell the 172 alloys, so it looks like im keeping them!

so eventually you will see it in its full glory!

but your takeing to long im in patient :rasp:

 

[R1XPH]

Hellooo?

Wire size?

 

[BioHzrd]

1mm will be fine.....

 

[willynwilson]

Oh god not a Mk3 on Turinis !!!!!!!!

no not on turinis!

Lol, its the 5 spoke jobbies!

 

[BioHzrd]

Thank god for that or i would have had to hunt you down !!!!

You got those pics uploaded ???

 

[verojie1234]

I'm a bit of an amateur at this and I know i'm 5 years late but what do you mean when you say attach the running wire to the green wire? How would i go about this?

Thanks fingers crossed for a reply lol :clap: