ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Clio Ph1 Speedo Sensor Issues



  Clio III RS200 Cup
Hi Guys,

I've almost finished my clio phase 1 restoration, and unfortunately have come up against one last, tiny but insurmountable hurdle. I cannot get the speedo to work, despite buying both a new genuine sensor, a Chinese sensor, and also trying a known working sensor from a clio 172 ph2. I can't get the car registered in Australia without the speedo working.

I've taken the cluster to a gauge specialist and also tried the diagnostic function and the speedo dial still works, and the speedo works with a sensor from another car. The gauge specialist tested the renault gearbox sensors and they're only outputting 4.5 volts - is this normal?

I have also tested the continuity from the speedo sensor to the gauge cluster with a multimeter and it appears fine as well.

Has anyone come up against this problem?

I potentially could use a gps speedo, or use an arduino to increase the voltage of the signal, but would just prefer to have it working as it should.

IMG_0714.JPG


Cheers,

Nick
 


Top