CLIP or resistors

[jp_lcr]

Hi just wondered if anyone near Sheffield S20 had a CLIP and could programme out steering wheel and passenger airbags removed plus drivers pre tensioner/ seatbelt at some point in the future when I've fitted please?

Or if you think it's better to put in resistors instead?

Thanks.

 

[Clio_fool]

@YorkshireKyle can do it with his RS tuner.

 

[Krarl]

Aye I can do it mate, dont bodge it with resistors. Plus u can do a full code scan of your car too so you can see about any other issues

 

[haimsey]

Airbag module on my rstuner only cleared them temporarily. Resistors didn’t work either, so mine are currently just unplugged

 

[Martin.]

CLIP will sort it for good. Graham did mine recently.

 

[Krarl]

You didnt clear them properly then @haimsey

 

[JamesBryan]

RSTuner will work if you configure it properly, i've done a few cars now.

Where some slip up is leaving things plugged in or resistors still in, but turning them off in RST. It's still seeing them as being there so you have to remove/unplug.

 

[jp_lcr]

Aye I can do it mate, dont bodge it with resistors. Plus u can do a full code scan of your car too so you can see about any other issues

Top man thanks very much. I didnt switch notification on so only just seen replies! Will give you a buzz when I've fitted them.

I've picked up a Sabelt GT3 seat and mounts new for half price, got a Joz foz subframe then ordering a Momo boss and new all black Sabelt wheel plus the Volantech 2 button carbon horn panel (only about 15 quid more than phase 1 stalk and pretend I'm a fighter pilot/Cup racer wannabe)

Just need to measure up and source a seatbelt buckle to suit. I think I can run 3 point through harness holes on sides.

 

[Krarl]

Top man thanks very much. I didnt switch notification on so only just seen replies! Will give you a buzz when I've fitted them.

I've picked up a Sabelt GT3 seat and mounts new for half price, got a Joz foz subframe then ordering a Momo boss and new all black Sabelt wheel plud the Volantech 2 button carbon horn panel (only about 15 quid more than phase 1 stalk and pretend I'm a fighter pilot/Cup racer wannabe)

No problem haha, give me a shout when you need a hand and I can pop over mate

 

[haimsey]

You didnt clear them properly then @haimsey

Why so? Purchased the additional module, scanned and reset the faults. Only so many buttons you can click on the rsTuner. Unless I’ve missed something? Or need to take out any resistors that are in place

 

[Krarl]

Why so? Purchased the additional module, scanned and reset the faults. Only so many buttons you can click on the rsTuner. Unless I’ve missed something? Or need to take out any resistors that are in place

You need to remove the resistors so the ECU can see that there's nothing there so you can then fully disable it mate

 

[haimsey]

You need to remove the resistors so the ECU can see that there's nothing there so you can then fully disable it mate

That’s why then, confusing it. I’ll give it another try next time I get chance
Even with resistors in he lights never went out.

 

[jp_lcr]

I've fitted seat and will be doing steering wheel tomorrow but given were in lockdown might be several weeks before can ask someone to pop round and code out lights for me as @YorkshireKyle kindly offered.

So thinking I might get a tool to do it myself, I'll be keeping car long term so be useful for diagnostic etc. Could anyone point me in the direction of best value for money tool for that please?

 

[Krarl]

Best value for money long term is either an RS Tuner or CLIP. I've got an iCarsoft and an RS Tuner but I'll still end up buying CLIP at some point

The amount of functions you miss with the iCarsoft can be rectified with the RS Tuner but CLIP does everything (bar load a tune). One advantage is that I constantly buy French cars so I'll always have and use these tools and theyll pay themselves off within the first year of having them no doubt

 

[Clio_fool]

One advantage is that I'm stupid and constantly buy French cars so I'll always have and use these tools and theyll pay themselves off within the first year of having them no doubt

Fixed that for you pal 👍😂.

 

[Krarl]

Fixed that for you pal 👍😂.

Gimme a shout when either of the 3 French bean tins on your driveway break😉😂😂😂

 

[Clio_fool]

Gimme a shout when either of the 3 French bean tins on your driveway break😉😂😂😂

Hey I never said I wasn't similarly afflicted. I've had 10 French tins so far 🤦‍♂️. #NeverLearn

 

[Krarl]

Hey I never said I wasn't similarly afflicted. I've had 10 French tins so far 🤦‍♂️. #NeverLearn

I stopped counting at 10🤦‍♂️😂