Cold air pipe (Where to put)

[George16v]

Some of you will have seen my cold air pipe on Sunday, so I would like to see where others have put theres, Preferavly pics/details about mk1 172s please.

Am considering just attaching it onto the original air feed - ease more than anything else



http://www.hothatch.net/forum/index.php?s=52b9183a7d0b99de4e77c59b33ffbe91&act=ST&f=7&t=58http://www.hothatch.net/forum/index.php?s=52b9183a7d0b99de4e77c59b33ffbe91&act=ST&f=7&t=58

 

[George16v]

PLEASE - ANY IDEAS

 

[BenR]

hows does your existing pipe go, where etc etc?

 

[George16v]

Well It goes from the enclosed Induction kit straight down to the bottom of the car and through/around other piping to the front lower grill.

Think tbh that the best thing will be to attach it to the back of those front bumper grills that only the mk1 has

 

[BenR]

got a pic?

 

[George16v]

No, Training all week, will get one though

 

[George16v]

Right I have done it.

Removed the hard plastic ends from the original pipeS which both go to the near side grill on the mk1 bumper. So reduced the size of my IK pipe from my quickshift taipan kit and carried it over the top of one of the original pipes. At some point will remove the bumper have a proper look and see If I can attached the taipan pipe straight to the back of the grill. Is good though can feel the kit sucking in air from the bumper grill even at idle. hehe