Adey.
ClioSport Club Member
Does anyone have to hand the torque settings for the cam caps on the 1.2 16v engine please?
ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
D4f torque settings
- Thread starter Adey.
- Start date
Not 100% sure of the bit you mean. So just taken from Haynes manual hopefully it helps.
Camshaft
Stage 1 - sprocket end bearing cap bolts 1 & 2 = 9nm
Stage 2 - rocker arm rail bolts = 5nm
Stage 3 - bolt 3 fully loosen then tighten to 7nm
Stage 4 - bolt 3 angle tighten by a further 50 degrees +/- 6 degrees
Stage 5 - bolts 4 to 12 repeat stages 3 and 4 in turn in the correct order
Camshaft
Stage 1 - sprocket end bearing cap bolts 1 & 2 = 9nm
Stage 2 - rocker arm rail bolts = 5nm
Stage 3 - bolt 3 fully loosen then tighten to 7nm
Stage 4 - bolt 3 angle tighten by a further 50 degrees +/- 6 degrees
Stage 5 - bolts 4 to 12 repeat stages 3 and 4 in turn in the correct order
Adey.
ClioSport Club Member
Ahh cool, cheers bud I think I can work with that
Similar threads
