ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
De-Badge PLEASE HELP!!
- Thread starter Wyvill10
- Start date
Inferno 225 cup
A bank card or fishing wire, as for the Clio badge a small flat head screwdriver and cloth to stop it touching the paint work.
If you have no intention of putting it back on then I would suggest this.
I just poured it behind the badge and it eventually dissolved the glue perfectly
and left behind spotless paint.
I just poured it behind the badge and it eventually dissolved the glue perfectly
and left behind spotless paint.
If you have no intention of putting it back on then I would suggest this.
I just poured it behind the badge and it eventually dissolved the glue perfectly
and left behind spotless paint.
Im wanting to spray them a black and put them back on if possible
In that case i'd suggest buying another 'Renault' badge and spraying that.
For the rear diamond you have to removed the whole thing as the diamond's bonded on.
Open the boot unscrew the plastic cover, then undo the 3 bolts holding it on and it just pulls off.
For the rear diamond you have to removed the whole thing as the diamond's bonded on.
Open the boot unscrew the plastic cover, then undo the 3 bolts holding it on and it just pulls off.
Inferno 225 cup
Open boot, take plastic off romove three nuts, A little bit of tugging and wiggling then wallah 
Last edited:
It pretty easy tbh, I did mine with zero knowledge of how to remove it or spray it.
Turned out pretty good if I do say so myself, I even colour coded the boot lock button.
Turned out pretty good if I do say so myself, I even colour coded the boot lock button.
Inferno 225 cup
It pretty easy tbh,
Turned out pretty good if I do spray so myself
Last edited:
No you have to remove that separately but it's a piece of piss,
unplug a connector or two, couple of bolts to undo and that's it.
The hardest bit is holding the button down to slide the mechanism out.
unplug a connector or two, couple of bolts to undo and that's it.
The hardest bit is holding the button down to slide the mechanism out.
Rs200
looks good that mate well on
yes the clio badge has 2 holes behind it both on ph1's and ph2's
can always get a metal plate behind it, filler it up, then spray it?
just about yeah, loadsa people have done it on here
Yes there are 2 holes buddy :-(
LOL I botched removing my Clio badge. When I took it out I pulled out the black hole filling things it clips in to then got some plastic off a packet from halfrauds it was that flimsy plastic on one of those sealed packets you need scissors to cut open. Anywho took out the boot lid lining wiggled the plastic in there with masking tape then wacked loads of filler in the holes lmao!
Held up for about a year then died. Pfff.
Held up for about a year then died. Pfff.
That's why I fillered it mate then sprayed it (sprayed like a yobbo, looked w**k).
Absolute F up of a job and left a layer of paint over my paint so there was a line across the top of the sprayed areas also when I peeled back the masking tape it flopped onto the left hand side and left that grey mark awesome. Back when I was a t**t and knew nothing about painting.
Absolute F up of a job and left a layer of paint over my paint so there was a line across the top of the sprayed areas also when I peeled back the masking tape it flopped onto the left hand side and left that grey mark
awesome. Back when I was a t**t and knew nothing about painting.Similar threads
