Dewiper

[Jackwoody]

Taken the nut off but ant pull the bloody wiper off!!! Help. !!

 

[Knuckles]

Use two spanners. One over the nut and wiper. Then undo the nut with the other spanner.. It'll pop it off

 

[Jackwoody]

Got the nut off just the wipers stuck on lol!!

 

[Djw John]

Put the nut back on and then do as knuckles says, use a 17mm spanner over the wiper and nut to act as a puller

 

[Knuckles]

Put the nut back on and then do as knuckles says, use a 17mm spanner over the wiper and nut to act as a puller

I knows mah s**t :approve:

 

[Fletcher]

I used a dremel to remove mine.

 

[Djw John]

Yeah, also used a hacksaw before tbf!

 

[Knuckles]

Dear me! Roughians

 

[Dan@M.A.D]

Literally just hacksawed mine off 5 minutes ago! It's the best easiest way.

 

[Knuckles]

Was it just me who wanted to put the thing back on eventually lol!?

 

[Stefan.]

Was it just me who wanted to put the thing back on eventually lol!?

pmsl i thought that too knuckles

 

[Jackwoody]

This is just me being retarded but I don't quite understand what your saying to do :s

 

[Knuckles]

This is just me being retarded but I don't quite understand what your saying to do :s

Give me 5 mins

 

[Jackwoody]

Ok mate

 

[Knuckles]

I hope that explains it lol

 

[Jackwoody]

Ye I've got both nuts loosened off but the actualy wiper where it goes onto the thread is ceased on :/

 

[Fletcher]

Ye I've got both nuts loosened off but the actualy wiper where it goes onto the thread is ceased on :/

Hacksaw, dremel, disc cutter

 

[Knuckles]

Ye I've got both nuts loosened off but the actualy wiper where it goes onto the thread is ceased on :/

That happened to mine... So I did the above and it unsiezed. Ask around for a ball joint splitter... If that fails, hacksaw.


Lol I just noticed I put the nut on before the wiper! r****d haha

Did you actually try the above? Put the nut back on as tight as it'll go. Put a spanner over the nut and wiper then undo the nut with the first spanner still in place. If you do it right it'll pop off

 

[Two Foot Tone]

I hope that explains it lol

This image is quality! Can it be added to a guide?

 

[Knuckles]

This image is quality! Can it be added to a guide?

If it does I'll amend the wiper/nut **** up lol... Although it could be believed that Renault would make them like that

 

[Z3RO]

Maybe with a Sledgehammer.....

was joking mate!

With mine i've used this:
http://www.beta-tools.it/catalog/img/Foto/hr/img1335_hr.jpg
i bought it a bunch of years ago and it saved me by so many problems i'd say i love it. it's quite cheap and really useful. if no one can borrow something to help..think about that little helpy thing!

 

[Djw John]

Cut it off already I've got 2 I could sell to you as replacements!

 

[Jackwoody]

Thanks for all the ideas and suggestions and for the pic lol , I finally sorted it out after alot of swearing and throwing stuff around lol, I resorted to the hacksaw through the plastisol bit that came off reasonably easily then onto the ceased on metal nut!!! Was an absolute b*****d but it is off and looking alot cleaner!!

 

[Aztec95]

Once you take the wiper off what do you do to cover the hole?

 

[Jackwoody]

Duck tape until I can get to halfords lol!

 

[Fletcher]

Once you take the wiper off what do you do to cover the hole?

Halfords sell bungs that fit it perfectly.

 

[Aztec95]

Sweet! Isit an easy job yeah?

 

[JHead]

Just to bump this i guess...

What size grommet is needed for the hole? Cheers