ok bit strapped for cash at the mo cant afford a full service just got a job after 4 months. car had 2nd service march last year it now has 39767 it still drives mint the car never gets driven hard. i atleast want to do the oil and filter never done it before how hard is it to do thanks'
ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
Due to ongoing maintenance work some features and functions (including Dark mode!) may be unavailable or visually appear differently.
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Black Gold Trophy
really straight forward:
1) Ensure the vehicle is on level ground jack car up and put on axle stands
2) remove engine undertray and engine cover
3) remove oil filler cap, and use an 8mm square bit to remove the sump plug
4) drain oil into a container so it can be taken to a household waste site
5) remove the fuel rail guard using a deep 10mm socket to allow access to remove the oil filter
6) place a rag below the oil filter before removing it
7) make sure you have allowed all the oil to run out and if you have new oil, then pour some in with the sump plug still out to flush the old oil out fully.
8) fill the new oil filter up with oil, and smear the rubber gasket lightly with oil before refitting
9) refit the sump plug, with a new copper washer and tighten to 15Nm, refit the engine undertray and lower the vehicle back onto the ground
10) refill the engine with approx 4 litres, then fill slowly and keep checking the dipstick to ensure the level is between the maximum and minimum levels, refit engine cover
1) Ensure the vehicle is on level ground jack car up and put on axle stands
2) remove engine undertray and engine cover
3) remove oil filler cap, and use an 8mm square bit to remove the sump plug
4) drain oil into a container so it can be taken to a household waste site
5) remove the fuel rail guard using a deep 10mm socket to allow access to remove the oil filter
6) place a rag below the oil filter before removing it
7) make sure you have allowed all the oil to run out and if you have new oil, then pour some in with the sump plug still out to flush the old oil out fully.
8) fill the new oil filter up with oil, and smear the rubber gasket lightly with oil before refitting
9) refit the sump plug, with a new copper washer and tighten to 15Nm, refit the engine undertray and lower the vehicle back onto the ground
10) refill the engine with approx 4 litres, then fill slowly and keep checking the dipstick to ensure the level is between the maximum and minimum levels, refit engine cover
Similar threads
