What is needed for a complete EPAS kit then?!
And who know the part numbers off the Renault parts..
Cheers
And who know the part numbers off the Renault parts..
Cheers
ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
Due to ongoing maintenance work some features and functions (including Dark mode!) may be unavailable or visually appear differently.
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
EPAS
- Thread starter deanoE30M3
- Start date
Clio 172 Merc ML55
Steering column inc the lower part and ecu from a lower spec clio (either 1.2 or did are the most common ones), an eBay controller such as this https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/142463350168, other kits are available but this one has everything you'll need bar some suitable cable to complete the wiring up of the motor/ecu, you can either re use your original steering rack, remove the high pressure hoses and blank off the ports or use a dci rack (slighty shorter ratio than the 1.2 ones I believe).
You'll then need to address the pas pump on the aux belt, either with an idler or by using a cup alternator setup, assuming you're also removing air con too?
There is plenty of info on here for doing the above but if needed I can talk you through it either through pm's or if you're close to the Forest of Dean I could even walk you through it on mine
Ads
You'll then need to address the pas pump on the aux belt, either with an idler or by using a cup alternator setup, assuming you're also removing air con too?
There is plenty of info on here for doing the above but if needed I can talk you through it either through pm's or if you're close to the Forest of Dean I could even walk you through it on mine
Ads
