Exhaust Piccies Please

[jessica_laurie]

As most of you have probably read, i am looking at buying a custom exhaust.

Question is though.. do i get it cut into the bumper or not?

Anyone got any pics of theirs?.. becos ive had no luck lookin in the galleries.

 

[kully]

prospeed oval cut into bumper -:

 

[rory182]

prospeed round cut into the bumper with a 182 surround looks the dogs danglies IMO

 

[DougClio16v]

I need to get my pipe re-ajusted tho. Didn't wanna cut a whole in my bumper, and also there isn't a body shop near me

 

[jessica_laurie]

thanks hun.. that looks really neat


im thinking of getting one of these..

ooooor

1. what do you think?
2. shall i get it cut into the bumper or not?
3. is it possible for someone to do a photoshop?


sorry to be a pain in the bum

 

[jessica_laurie]

im lowering the clio -60mm, thats why im considering to have it cut into the bumper.. dont want to be scrapping speedbumps!

 

[DougClio16v]

Don't worry, ill come up to Swansea and you can pay me back lolz

Go for straight cut as opposed to slashed cut. You can easily fit twin can under the rear bumper without having to cut into it.

http://www.k-tecracing.com/show_product.asp?id=420&pic=2

 

[W17GLE]

magnex twin three inch

 

[C.slicker]

Doug pleeeeaaassse change those lights back to standard.

I beg you!

 

[DougClio16v]

Doug pleeeeaaassse change those lights back to standard.

I beg you!

What's wrong with LED's? Save power on the battery and last 5 times longer then standard bulbs

Also if I get my origi's out, I gotta dig through the shed, then take these ones off, then disconnect the wiring panel and get half my finger skin ripped off in the process, then put the buggars on again.

Not quite sure original lights will go with my new Wolfrace's.. hmm.

Dont worry.. Car is going back to standard when I sell it though. Not for 3 years yet!

 

[jessica_laurie]

thanks for the pics guys.. should i get a nice deep note with a 3" round twin ?

 

[pendle7]

my exhaust..................................

 

[jessica_laurie]

thankyoooooooo, hmm that looks bery smart!

gosh im gonna be changing my mind again!

 

[Peperami]

Erm, mine are all too big to post up, but is a cut in prospeed, with 182 surround.

 

[BREMBO]

This is mine, custom made freeflow twin exhasut, the bumper has been cut so it fits better

Sounds good too.

 

[BREMBO]

I would get it cut into the bumper, otherwise it will sit at an anle

 

[DazG]

^^

Those tailpipes look massive!

 

[BREMBO]

ahahaha

 

[Russy B]

dont go for something too loud or keep your original parts as when u come for an MOT, they'll fail you as it will be too loud, i'm talking from a past experience.

had a rage st11 (which is for sale £20) an kwik fit failed it cuz it was too loud (B*****DS)

 

[DrR]

I really hate cars with exhaust "hanging" like all these lol.

 

[Russy B]

some exhausts the tailpipes come out of the backbox than others, so u might be okay not having to cut bumper, like twin magnex ones

 

[benji&eka]

 

[Day]

Custom ProSpeed cut into bumper using Clio 182 exhaust surround to give the "standard" look about it.

 

[benji&eka]

oooh nice

 

[Peperami]

Ta day, lol. Mines same as that, but the car is blue.

 

[Sy]

Heres mine and yes I know it looks a bit poop so all you freaks get back in your cages.

Personnally I would have it cut in. Mine came like this.

Sy

 

[V1NNY]

 

[Peperami]

Skindeep, pmsl at the file name.

 

[Graham Gooch]

I like skindeep, he's honest lol.

 

[Sy]

Skindeep, pmsl at the file name.

I like skindeep, he's honest lol.

Well I could hardly say it looks good now could I lol.

I just have not got round to changing it yet, which is bad as I have had the car since 2005!


Sy

 

[al]

Custom ProSpeed cut into bumper using Clio 182 exhaust surround to give the "standard" look about it.

Very smart!

 

[al]

I like skindeep, he's honest lol.

Well I could hardly say it looks good now could I lol.

I just have not got round to changing it yet, which is bad as I have had the car since 2005!


Sy

PSML, get it sorted!!!

 

[rory182]

aye what Day and Peperami have is what you want

 

[jessica_laurie]

ive been quoted 149 at prospeed

im getting a twin exit and it will be slightly cut into the bumper..
but do i get a slashed cut or just straight?

 

[DougClio16v]

ive been quoted 149 at prospeed

im getting a twin exit and it will be slightly cut into the bumper..
but do i get a slashed cut or just straight?

Have a nice straight cut a*se love.. Don't want a wonky bum, looks naff. IMO. :rasp:

 

[davejm123]

slash cut and cut into the bumper, not hanging below imo

 

[welsh172]

ive been quoted 149 at prospeed

im getting a twin exit and it will be slightly cut into the bumper..
but do i get a slashed cut or just straight?

2 exit will be quite loud, depending on the size, i have a pro speed single slash cut like the one about cut into the bumper...i do go for slash cut to follow the shape of the bumper

 

[mwatts_tci]

This is mine, custom made freeflow twin exhasut, the bumper has been cut so it fits better

Sounds good too.

I have seen that somewhere before:

oh yeah:

Looks good mind.

 

[benji&eka]

LOL

 

[S77CCP]

http://www.flickr.com/photos/clio_rs/455771741/in/set-72157600067004820/

GDI system.