FAO All Eagle F1 Users

[Moose1978]

What pressures do you run at?

I have recently fitted a set and have them at standard pressures as quoted in the handbook but they seem very hard.

Cheers

 

[Tom_16v]

29-30psi

 

[McBunny]

to me they seem very soft

 

[Swervin_Mervin]

Same as standard. They are a bit stiffer in the walls.

 

[Moose1978]

They dont feel that hard.....but I have noticed the front end starts to break awy quite a bit easier than when I had the Contis on.

Tought it might that I had them pumped up too much???

 

[LEWY]

ive put them on mine after changing from Contis too - same as - ive got them at 29 on the front

 

[Moose1978]

what you running on the rear Lewy.

 

[Andyman]

Quote: Originally posted by LEWY on 19 February 2004

ive put them on mine after changing from Contis too - same as - ive got them at 29 on the front

29 PSI thats a bit low that. I worked it out to be 33 front and 31 rear.

 

[Lee]

Im running 33 in the front 31 in the rears too.

 

[CUPPY]

same here mate...

 

[Andyman]

Come on you lads who are having probs with the F1s get your bicycle pumps out

 

[Nick Read]

Ive always run mine at least 34psi cos I dont like the lack of high speed stability at lower pressures. Theyve got a square enough cross section to not go bald in the middle at these kind of pressures as long as youre running a 40 profile or less.

 

[Matty]

Run mine at 31 on front. But have S02s on rear.

 

[swelch]

I run at 35 front and 31 rear

 

[LEWY]

maybe i should pump them up a bit!! - 33 front you think then 34 rear...?

 

[swelch]

rear needs to be less