Fitting oz f1 cups to a 172 cup info needed

[CHRIS172CUP]

I'm running H&R coilovers on my cup, pretty low and wondered what to do if i were to fit ph1 oz f1's? Are they et40, is it a good idea to run spacers? If so where can one purchase?

I'm guessing ideally make them an et37??

Any help would be great

 

[Linsen]

Don't know if there are different versions around, but my 15" OZ F1s have an offset of 37.

What's the standard offset on the Cup?

 

[Andy_J]

you shouldn't need to do anything!

I had to use 5mm spacers on my k4m ph1 but i think that was mostly due to the aggressive camber i was running..

 

[CHRIS172CUP]

the 172 cup turinis are et 38.5

 

[Steve]

My track ones are 7J 15 ET42 or 43.

 

[CHRIS172CUP]

i'm guessing by your avatar you have a trophy so yu're offsets are different to mine.

 

[Day]

ET43 Chris

I reckon you will need spacers.

I fitted a trophy alloy to my car at the weekend and it looked shite, too far in the arch.

 

[CHRIS172CUP]

oh right, that's quite a few mil out!

 

[Little Newms]

Slightly of topic.... Do you know anywhere that sell F1 new then??

 

[Day]

You can order them through your local dealer but there maybe a waiting list as they are now made and supplied to order.

 

[Andy_J]

i have 2 but they are in need of a re-furb!