How many cable ties are holding up your exhaust?

[Skeeter]

After adding 3 more today, I'm currently running with 12!

9 on the rear mount holding it up and to the side, one metal one wrapped around the centre mount to stop it stretching, and 2 more metal ones holding 2 bits of heat wrap in place to stop it vibrating against the spare wheel well!

So, how many have you got?

 

[dubdub]

7 one on center mount as bolt snapped and 6 on the rear mounts, also two sockets to hold the back box up.

 

[JackD]

0 at the moment which is why mines hanging down about 1 inch from the floor! Going to sort it out Monday though so will probably need about 15!

 

[sideways danny]

none. MK1's FTW

 

[Sam@NP]

0. Yozza FTW

 

[mr.pink87]

0. Tigerseal "uprated" rear exhaust mount FTW

 

[Cup_Phil]

None - prima racing exhaust mount FTW

 

[tom172cup]

None as i have used round tube and some acrylic (sp) glue in mine dont move at all

 

[-Tommy.]

None. Rattles on the rear axle no end though.

 

[Gouldy]

None, powerflex universal exhaust mounts Ftw

 

[Rob]

None.

Standard mounts too.

 

[hughski]

3 cable ties, a socket and it still isnt right. Thanks Milltek.

 

[Fletcher]

None.

Cable ties are for pikeys

 

[PP200t]

2 and some 90 degree brackets that I found fitted like this ^ in the mounts. Doesn't do a great job, but better than nothing and better than wasting sockets!!

 

[stacky]

3 sockets and 20 ties perfect cant see the stealth how it shud be !

 

[Mark One]

none. MK1's FTW

Like.

 

[JackJack]

None on my Prima racing mount.

 

[rich-6]

None, Milltek sitting lovely on standard hangers

 

[CraigIrl]

Prima racing mount is the only way.

 

[SBV116]

0, yozza combined with prima mount. if carlsberg's made exhaust's............

 

[scotty2hotty81]

Piper/gdi recessed with 182 exhaust surround, 3 cable ties one random nut and one random bolt to keep it dead centre lol!

 

[oliver.james]

None. Prima racing mount here too.

 

[SBV116]

to be honest.. there shouldn't be cable ties on 172's.......

 

[Jonny1*2]

BTB = no ties required

 

[Turkish]

Guess...

 

[Clart]

at least 5. And i have to adjust it every 6 months.

 

[Joe R26]

4.

 

[NATHAN182]

1

 

[Ralphizzle]

Nil!

Electric copper cable (2 twisted wires) wrapped round the stealth exhaust...
Have to push it back in the rear mount though, hanging crooked now.

 

[Turkish]

0

 

[Martin_172]

0 - 1.6 16v, 172 & MK3 FTW!!

 

[JCC]

The current one - none, it has warranty if it starts rattling/sagging.

The 172 I had one holding a socket in place in the rear mount so the Ktec Stealth didn't look like a penis hanging under the bumper.

 

[st3ve]

None.

Yozza + genuine Renault mounts.

 

[Aluco]

1 to hold a small rubber thing in my new mount on the left side. (Ktec ultra exhaust)

I think it's blowing as well.

 

[one in a million]

i dont have cable ties, i have shrub ties lol, just incase my decat decideds to over grow :rasp:

 

[syko6288]

Ive got one on the rubber mount to centre the tip in the bumper cutout and then a metal tie wrap pulling the tip up to near enough same position as the other

 

[montana]

5.

3 metal ones on the rear mount holding the socket in place and 2 plastic ones on the center rubber to stop it stretching

Job done - £0 cost

 

[Tunst]

None.

Cable ties are for pikeys

This :rasp:

 

[Goodj]

Two.

Pattern mount with "JMS upgrade"

 

[Leeshez]

None for me.