In basic terms mate all you have to do is this...
* Remove "Sump Drain Plug" and drain the old oil
You may require a square section tool do this but you can buy them at halfords etc..
* Remove the oil filter
It should be hand tight but if its hard to get too you may require a filter removal tool to make life easier...
* Smear some new oil on the new oil filter seal and tighten up by hand
* Refit "Sump Drain Plug" with a new washer
* Fill engine with the required amount of oil
You should find this in your owners manual!
* Start engine and let her warm up... then check oil level again
Top up if required but dont over do it!
Its also easier to drain the oil if you warm her up a little first, but be warned cos the exhaust manifold will be hot!!
If you have any doubts mate take it to a garage, its not worth it if you f*ck summat up cos your no good with a spanner!
