InCarTec Leads

[Paul M]

Have some InCarTec stalk control adaptor leads leads to fit. How easy (or difficult depending on how you look at it) are they to fit?
I'm of the "Not very technical" school of approach.
Any install pi cs or guide would really help

 

[msa197]

You have to remove the dash to plug the connetor into a socket behind the radio display.

Guide to removing dash.
http://fubarnet.com/dashboard_ph2.html

Easy to fit once the dash is off.

 

[Paul M]

Thanks msa197

 

[bmh.01]

You don't with the incartec leads. They just plug into the yellow mini iso connector, much easier can be just with just removing the headunit.

 

[Russ.]

InCarTec leads are a doddle.

If you can fit a headunit, you can fit them.

• The 3.5mm jack (headphone type connector) plugs in at the back of your new headunit.
• The yellow iso connector plugs into the yellow iso connector (simple enough)
• The Black iso power connector again just plugs in the following order - Car > InCarTec adapter > Headunit

All being well your steering controls will now work and the display will say the make of your headunit.

 

[Paul M]

InCarTec leads are a doddle.

If you can fit a headunit, you can fit them.

• The 3.5mm jack (headphone type connector) plugs in at the back of your new headunit.
• The yellow iso connector plugs into the yellow iso connector (simple enough)
• The Black iso power connector again just plugs in the following order - Car > InCarTec adapter > Headunit

All being well your steering controls will now work and the display will say the make of your headunit.

Sounds that easy I can probably sort it