ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

L.E.D Interior Light Bulbs?



  PH2 172
Iv been wanting to change my interior light bulb to a L.E.D white bulb but not sure on where to get 1 from any ideas peeps and anyone got any picstures with theres done.
 
  Bumder With A Buffer
Gimme a sec and il Tell you. You can buy them from www.shinyautos.com

BUT from what I remember a cups set-up is different from a normal 1*2 for the interior light (where the map light is etc)... Il be back...
 
  Bumder With A Buffer
Right found what I was looking for about the interior map light etc..

right fitted mine about 10 mins ago and a bit pissed about 2 things:

1. the main interior light only work either when opening the door or by reversing it you can use it as the interior light for reading maps etc - not both!! this is fecking annoying.

any ideas anyone?

I've had the same problem on my Cup, done a bit of investigating and this is what I found.

The light uses a centre positive connection, a permanent ground on one side and a switched ground on the other side. When you switch the light into different positions it reverses the polarity onto the bulb. This is no problem with the standard bulb as it will work with current flowing through it in either direction and therefore will work in both positions. However, with the LEDs it means that the light will only work either:
1. When the light switch is in the position where it is activated when the door is opened, and will not work when you try to put it in the position where it is permanently
2. When the light is in the position where it is permanently on, but will not work when the door is opened.

To rectify this you can put a second bulb in parallel with the first bulb, but with its polarity reversed. If this is done, then the light will work in both positions (one bulb for each position). Unfortunately there's no easy way of mounting a second bulb, and at the moment it looks like it will probably be wires soldered to the bulb and to the contacts in the light to make this work.

This should be all the information about what bulb types they are too :)

I might try that site too, can all the bulbs be got and is the price much different?

You can get them yes, although they only come in Amber or White. And the Festoon type (For the glove box) is £4.99 each! s**t a brick!

FESTOON TYPE http://www.ultraleds.co.uk/advanced_search_result.php?keywords=festoon&x=0&y=0

Interior Lights and sidelights are on this page

http://www.ultraleds.co.uk/automotive-bulbs-501194t10w5w-10mm-wedge-c-101_129.html

ALSO FOUND THESE

http://www.ultraleds.co.uk/uf12ww-ultra-bright-wide-angle-501ba9269264239-p-1331.html
 
  Bumder With A Buffer
  PH2 172
So for the interior light once fitted the L.E.D i can have it so when i open the doors it comes on and when i lock it, It goes out and can i have it so when im in the car and i put the light on it come son so i can see what im doin at night all i want is the glove box interior light and boot light can i not get them from ebay fr much much cheaper?
 
  Bumder With A Buffer
Do any of these fit a normal 1.2 dynamique?

Should do. They are all the same fitment. Once I have posted up the measurements of mine etc tthen if you compare your sizes to mine...If they are the same 'Jobs a Good un' :)
 
  Bumder With A Buffer
Okay this is what mine are...

First the Glove box and Rear Boot one is this..

24072008215.jpg


Its a "festoon" type and these should cover it

http://cgi.ebay.co.uk/2x-XENON-WHIT...hash=item180268945114&_trksid=p3286.m14.l1318

And this is the Map/Interior Light one.

24072008217.jpg


Its a 501 type LED and I reckon these should cover it

http://cgi.ebay.co.uk/2X4-LED-Xenon...hash=item180266428957&_trksid=p3286.m14.l1318

I could try and find cheaper ones but thats the easiest.

Or you could just buy the whole set from here....

http://shinyautos.com/shop/product_info.php?cPath=25&products_id=249

Pics of my Blue ones which Im changing to white soon

PC150175.jpg


PC150169.jpg
 
  PH2 172
yeha look good think they would look better in the xenon white which i want il check my messurments later today
 
  FTO GPX 2.0 V6
Can someone whack up some pics of the white ones at night when they arrive. I want to get some soon, the blue look nice, but am interested to see the white
 
  09 GIXXER 750!!!
Okay this is what mine are...

First the Glove box and Rear Boot one is this..

24072008215.jpg


Its a "festoon" type and these should cover it

http://cgi.ebay.co.uk/2x-XENON-WHIT...hash=item180268945114&_trksid=p3286.m14.l1318

And this is the Map/Interior Light one.

24072008217.jpg


Its a 501 type LED and I reckon these should cover it

http://cgi.ebay.co.uk/2X4-LED-Xenon...hash=item180266428957&_trksid=p3286.m14.l1318

I could try and find cheaper ones but thats the easiest.

Or you could just buy the whole set from here....

http://shinyautos.com/shop/product_info.php?cPath=25&products_id=249

Pics of my Blue ones which Im changing to white soon

PC150175.jpg


PC150169.jpg

I wonder would these fit??
http://cgi.ebay.co.uk/Car-24-LED-In...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
 


Top