Monaco 172 replica

[rsdan]

Hi just thought I would start this as I have been changing a few bits on my car and plan to do a few more bits on it.when I got it I removed fly eye off rear lights and yellow tints off the fogs. I then painted the bullets silver added sport door cards and handles. Also fitted a sport grill and cup splitter.
Plans for it are :
25mm front spacers
Sports steering wheel
Colour coded door handles
Xenons
And a cup spoiler
I'd appreciate any of your thoughts and ideas of what I could do

And a cheeky action shot

 

[rsdan]

Little up date on my progress , scince I posted in here last I have brought some 30mm hubcentric front spacers as well as a set of 2118's as they were going cheap , still not sure if I like them or my turbines better. I think it might just be the fact that there white so I may refurb them in andradite when the water gets warmer.also got some polarised wheel bolts witch look nice, after a couple of weeks worth of dirt building up and doing 250 miles in the week just gone on 25£ I thought the ole girl deserved a quick wash. Few pics below even tho I haven't got the spacers fitted and need my tyres changing on my wheels before I can use the 2118's

Pre wash

It really was dirty even tho the pics don't really shoe it ,

With my aunties once it was all clean will get some more pics tomorrow once there is some better daylight
Thanks got reading Id like to hear your opinions about what I'm doing to it

 

[lee M4RSH]

your predictive text made me giggle.

is it jacked up on the last pic? Looks a bit slanted

 

[rsdan]

your predictive text made me giggle.

is it jacked up on the last pic? Looks a bit slanted :tongueout:

Yeah , I should have checked it before posting really :/
think it's just the picture not really sure why it looks like that tbh

 

[rsdan]

Managed to get my spacers fitted today and I can't belive how much better it looks, wish I'd sorted them out sooner. I then tried to take some fancy pictures of the car but only having an iPhone to take them on and being rubbish at taking pictures there no where near as good as some peoples pictures on here. But here they are anyway .....

 

[Luke...]

Looks good mate! what engine is it? as its a rep and all that, tbh i thought it was a 172 till i saw it said rep so fooled me. Spacers makes a huge difference, just rears next then? haha. What happened to the 2118's tho?

 

[rsdan]

Looks good mate! what engine is it? as its a rep and all that, tbh i thought it was a 172 till i saw it said rep so fooled me. Spacers makes a huge difference, just rears next then? haha. What happened to the 2118's tho?

Thanks I'm glad some one likes it :up:it's a dci 65 so cheap tax, insurance and really good mpg
Might have to lift the rear up a little before I can space it as I don't want any rubbing, can't fit the 2118's till get my tyres swapped over and I'm not sure weather to refurb them in a darker colour first either,

 

[1hpclio]

Love the rim you have on dude atm

 

[rsdan]

Love the rim you have on dude atm

I really like them to ,just not sure they suit the car

 

[1hpclio]

Looks good and its different, just what i like

 

[rsdan]

Looks good and its different, just what i like

thanks , gonna run the 2118's for a while to see if I like them as I can always change back if I don't

 

[CoryColeWilkins]

Love this! Such a good replica.

With dark wheels I think it's important to keep the tyres looking black, they look rather grey in the pics. Some nice tyre dressing and them wheels will look lovely on the car .

I have a 68 1.5 dci sport replica. Love the car, such good engines.

 

[rsdan]

Love this! Such a good replica.

With dark wheels I think it's important to keep the tyres looking black, they look rather grey in the pics. Some nice tyre dressing and them wheels will look lovely on the car .

I have a 68 1.5 dci sport replica. Love the car, such good engines.

Thanks mate I can't make up my mind about the wheels tbh ,agree with you about the tyres but only managed to give it a quick clean yesterday, and as u can see by the pictures it's already dirty again so it's abit pointless at this time of year .
Got any pictures of yours ?

 

[Luke...]

Thanks I'm glad some one likes it :up:it's a dci 65 so cheap tax, insurance and really good mpg
Might have to lift the rear up a little before I can space it as I don't want any rubbing, can't fit the 2118's till get my tyres swapped over and I'm not sure weather to refurb them in a darker colour first either,

Ahh nice one! wish i went for a dci now instead of a 1.2, cheaper on insurance for me as well. I had the issue with the rear, raised it due to rubbing and now wish it was lower again, ever ending haha. I think a charcoal anthracite would look awesome, or you could just sell them to me?

 

[CoryColeWilkins]

Thanks mate I can't make up my mind about the wheels tbh ,agree with you about the tyres but only managed to give it a quick clean yesterday, and as u can see by the pictures it's already dirty again so it's abit pointless at this time of year .
Got any pictures of yours ?

Other than that, I love the wheels!

Um the only one I have of mine atm is the below one I took to send to my mate. I'd lowered it on coilovers too much and couldn't get out of the garage! [emoji23]

And that isn't up to date anymore, I have fitted universal projectors into the housing.

 

[rsdan]

Ahh nice one! wish i went for a dci now instead of a 1.2, cheaper on insurance for me as well. I had the issue with the rear, raised it due to rubbing and now wish it was lower again, ever ending haha. I think a charcoal anthracite would look awesome, or you could just sell them to me? :wink:

Yeah and the dci is a bit more tuneable if you ever wanted more power, might just leave the height for now as it sits level and I can't really afford to change it tbh ahah

Other than that, I love the wheels!

Um the only one I have of mine atm is the below one I took to send to my mate. I'd lowered it on coilovers too much and couldn't get out of the garage! [emoji23]

And that isn't up to date anymore, I have fitted universal projectors into the housing.

Looks good mate but I think it needs more lows

 

[CoryColeWilkins]

Yeah and the dci is a bit more tuneable if you ever wanted more power, might just leave the height for now as it sits level and I can't really afford to change it tbh ahah


Looks good mate but I think it needs more lows

Good one [emoji23] I have to use wood as a ramp to get it in, getting bored of doing that. Fast! [emoji30]

There are tuning boxes on eBay atm for £36 delivered from Germany. Takes our upto 80/82 bhp. Worth a punt!

 

[rsdan]

Good one [emoji23] I have to use wood as a ramp to get it in, getting bored of doing that. Fast! [emoji30]

There are tuning boxes on eBay atm for £36 delivered from Germany. Takes our upto 80/82 bhp. Worth a punt!

Haha I couldn't be dealing with that all the time 😊 Could be so long as it don't cause the dam thing to blow up ahah

 

[CoryColeWilkins]

How's your mileage looking? [emoji23]
Mines on 159k, had the belts and water pumps done last year. Look after these engines and they look after you. Mine hasn't missed a beat [emoji4]

 

[rsdan]

How's your mileage looking? [emoji23]
Mines on 159k, had the belts and water pumps done last year. Look after these engines and they look after you. Mine hasn't missed a beat [emoji4]

About 109k going on 110 and belts were done at around 85k but I've done near 5k in the three months since I passed my test so I might give it little service soon.

 

[CoryColeWilkins]

Plenty of life left!
Buy yourself a box and let me know how it goes [emoji6]

 

[rsdan]

Think I may have coincidently found the old owner of my car on here whilst searching for pictures of clios on turbines ahah
Here's one of @laurapooley21 old pictures of ,also found one of it at a Colchester meet would be good to know if anyone recognises it

 

[rsdan]

Little up date on my progress , have really just been using the car and enjoying it, however it has started developing a few problems, Abs rings are had it as well as the near side caliper is sticking, service light and air bag light keep coming on due to the wires under the seat, and a bit of a knocking noise from the rear however I'm not really sure what this is yet. I've also managed to bust my cup splitter already due to some idiot deciding to speed towards me on a single track road and me having to jump for the bank to avoid a head on :rage: It's also been getting very dirty just lately as I can't be bothered to clean it :tonguewink: However I have started to sort the 2118's will let the pics do the talking :smile:Hope you all like it

I'm hoping to get my tyres fitted to the wheels next week end and I've also got some speedline stickers ordered to put on them

 

[rsdan]

Done a bit if work on the clio today, managed to get it up on the ramp to do the abs rings however I had brought two 44tooth rings and mine were 26 so I managed to get one from euro car parts but they only had one, have nearley got one side back together but ran out of daylight , I've also had a look around the underside of the rest of the car to discover the knocking noise is because rear exhaust rubber has perished, I also noticed that the rear springs are very lose and with the mot just over a month away I think I'm going to have to sort this . Will it be the same with all lowering springs as they are shorter than standard or is it just that mine are very short? Should I just get some cheap standard springs and fit for the mot ? What the best option?

 

[rsdan]

Bit more of an update on my progress. after looking at my car one day in the work car park I thought it seemed as though the back was sitting lower than usual. I stuck my head under the back to find one of my springs was totally compressed.

So I decided I had better investigate this further and one of my rear shocks was leaking. I managed to pick up some 172 rear springs and shock for a good price and I fitted these. The car now drives so much better and ia more practice as I can put a load in the rear with out constand bottoming out ,

Ride height compared to my sisters standard 1.2

The next job I had to do was to fit my front arch liners and scrubed the arches

And finally the most exciting bit , I've finally manage to finish refurbishing the 2118's and got them fitted

Thanks for reading comments apriciated

 

[rsdan]

Not up dated in a while yet again, not done much to the car really though , Cars been MOT'd which it only needed an inner tie rod, wires under the seats bottom ball joint and a real wheel bearing doing which I don't think was to bad for a car what gets used as much as mine. Upgrade wise I've fitted some rear spacers as the new wheels had been slightly rubbing which was noticed on the mot. My plans for it now are colour code the door handles and boot handle, give it a good service and just maintain it well until the end if summer when I should hopefully be able to upgradeto something better as my insurance will be up for renewal, oh and I've also became a member on here so can search for more cheap parts :smile:
Before spacers :

During:

After:

Then after I'd been doing abit of rallying :wink:

And clean:

 

[BGEarles]

Jealous. Would love a dci like this.

 

[D4nny]

Looks good and love the way there's Clio's in the background of most pictures, id say defiantly colour code the doorhandles and fix the fog lights if you haven't allready and done a good job on the new alloys they look ace

 

[imprezaworks]

This looks brilliant and loving the wheels. I like the white too but then i am getting a white set of wolfrace for mine lol

 

[Scrooge]

This is a properly awesome DCi

 

[rsdan]

Thanks for all the great replies every one it's nice to know some people actually like it:up:

 

[rsdan]

Looks good and love the way there's Clio's in the background of most pictures, id say defiantly colour code the doorhandles and fix the fog lights if you haven't allready and done a good job on the new alloys they look ace

Thanks mate colour codeing is definitely on the to do list. Should be sorting the fog light as soon as I can get a new one as well as a skoda splitter as I managed to smash my genuine cup one

 

[dann2707]

This looks amazing mate. My hats off to you.

Looks and economy

 

[D4nny]

Ive got a skoda splitter on my ph1was bargin and think it looks good better than what I had for sure the silver vision bulbs for indicators isa nice cheap improvement not sure on ur boot release surround being black aswell somthing I also done was change the washer jets to mist spray type

 

[RSCaulay]

Looks good mate where did you get the rear spacers from?

 

[rsdan]

Looks good mate where did you get the rear spacers from?

Cheers mate . Got them off A chap on here think his name is @Josh_F .

 

[rsdan]

Ive got a skoda splitter on my ph1was bargin and think it looks good better than what I had for sure the silver vision bulbs for indicators isa nice cheap improvement not sure on ur boot release surround being black aswell somthing I also done was change the washer jets to mist spray type

Yeah might have a go at fixing mine first as I've still got the other part that broke off, got to be honest the orange bulbs never really fussed but boot release surround and washer jets are on the todo list:wink:

 

[D4nny]

Alot of people the bulbs don't tbh the washer jets I got are citreon ines either c4 ir Picasso I think but think there all mostly tge same and we're straight swap and dince noticed sane as mates saxo much better at clearing the window sone people paint the black boot release button and that looks smart

 

[RSCaulay]

Cheers mate . Got them off A chap on here think his name is @Josh_F .

Thanks man didn't realise they fitted non-sports did you modify them? (Sorry for the Q's) :smile:

 

[rsdan]

Thanks man didn't realise they fitted non-sports did you modify them? (Sorry for the Q's) :smile:

No problem mate , the spacers were a straight fit just had to buy some different bolts as the ones that came with the kit would not have fitted.