My Jacking point, folded on itself. pics.

[Craig_fell]

Is this common? i don't want to just bend it back out because it will be like monkey metal.

But the sport side skirt seems to be hanging over the rest of the sill (except the rear jacking point) so if i were to use a different bit i might crack the Side skirt.

Quickest solution to this anybody? :boring:

 

[Coops Mk1]

bend it back, cover it in underseal or similar and buy a proper jack and jack on the subframe/chassis rail

 

[bright]

A chain garage bent my drivers side sill, but not quite as bad as that. They're made of cheese tbh

 

[Dr HMS Derv Destroyer]

Yupp think allot of Clio's look like this.

Im welding a plate to mine so it don't fold on me again

 

[McGherkin]

Bent jacking points come as standard.

 

[Fletcher]

That's nothing. Mine are far worse.

 

[Matt Cup]

Bend them back and do this.

http://www.cliosport.net/forum/show...ing-point-prevention&highlight=jacking+points

 

[Matt_90]

Can't you just push the jack further under and get it on a front chassis rail on a clio? I can't remember :/

 

[Fletcher]

Can't you just push the jack further under and get it on a front chassis rail on a clio? I can't remember :/

Yes if it's not silly low. I can't on mine currently :dapprove:

 

[Cub.]

Yes if it's not silly low. I can't on mine currently :dapprove:

This. I have to use two jacks, one on the 'cheese point' shown above to get it high enough to get a second jack onto a stronger chassis point. Before the engine came out I got quite adept at driving it onto a brick to save using the 'cheese point'.

 

[Nick172Cup]

Bend them back and do this.

http://www.cliosport.net/forum/show...ing-point-prevention&highlight=jacking+points

I'm so glad you guys did that to my cup I got off you!

 

[Matt Cup]

I'm so glad you guys did that to my cup I got off you!

Thanks The amount of time we had our cars in the air proved their worth.