Official CSEA September Meet - Rolling Road Day - Date & Time TBC

[LewisTaylor]

My engine is brand new... I need to run it in once it's running There's no way I'll be having it on the rollers, but I'll come to see you all

 

[DannyR]

If you've just had it on rollers to be mapped though it must be run in, or is that just the base mapping.

It's staying for now Dom.

 

[Greeny.]

Mine will have been on the rollers just before this too, will be good to compare that figure with Rindys rollers.

Should be some powerful Clio's at this now then.

What you getting done? Turbo? Prepare to be disappointed going on Rindys rollers, they like to tell the truth! haha.


Can we get a mod to change the title as its not actually in Sept?

 

[dmallett]

Danny will Quinton be bring the evo?

 

[DannyR]

Yea I'll get title sorted this weekend.

He will yes, but 4WD means can't go on rollers!

 

[dmallett]

That sucks! my car will work on the rollers, yes?

 

[domsclio182]

What you getting done? Turbo? Prepare to be disappointed going on Rindys rollers, they like to tell the truth! haha.


Can we get a mod to change the title as its not actually in Sept?

Been on Rindys rollers before so know what to expect, we can all be disappointed together.

Your car will be fine Dan, Rindys rollers on 2 wheel drive(FWD OR RWD), you will just have to reverse in if they are round the same way as last time.

 

[Rhys Beal]

That sucks! my car will work on the rollers, yes?

In reverse

 

[LewisTaylor]

If you've just had it on rollers to be mapped though it must be run in, or is that just the base mapping.

It's staying for now Dom.

Matt mentioned something about running it in for me... So don't know just yet, I'm only expecting a base map to run it in then go back for final calibration, we'll see what happens

 

[Greeny.]

Been on Rindys rollers before so know what to expect, we can all be disappointed together.

Your car will be fine Dan, Rindys rollers on 2 wheel drive(FWD OR RWD), you will just have to reverse in if they are round the same way as last time.

Well im happy if ive stayed at the same power or gained very slightly from my new filter, according to Ktec I should have another 7-8bhp from it lol! We shall see

 

[dmallett]

In reverse

Thats a brilliant idea, Reverse Rolling Road day!!

Bloody genious :rasp:

Well im happy if ive stayed at the same power or gained very slightly from my new filter, according to Ktec I should have another 7-8bhp from it lol! We shall see

We should back to back test the ktec against a pikey motorsport home made one

 

[Greeny.]

Haha, cba to get mine out, to much of a tight fit.

 

[domsclio182]

My new induction set up should see some very good gains

 

[dmallett]

My new induction set up should see some very good gains

Going to spill the beans Dom?

 

[domsclio182]

Supercharger mate

 

[DannyR]

Awesome, which kit? You doing work yourself?

 

[domsclio182]

Ktec kit mate, will be fitting it with a mate, wouldn't mind a bit of help from you Dan if possible, will sort you out with some beer tokens

 

[DannyR]

Just send a PM if you need to know anything

 

[domsclio182]

Nice one thanks.

 

[dmallett]

Awesome Dom!

Should be awesome!

 

[Chri5]

1. DannyR - Ph1 Clio 172 - 250bhp
2. potter88 - Ph2 172 Cup - around 165-170bhp as Standard apart from ITG Panel Filter and Catback
3. Greeny. - Ph2 172 - Anything better than my previous 174bhp
4. T9 0LLE - Ph2 172 - Never had it on a dyno, running BMC Carbon Filter, Decat and Piper exhaust
5. P17 TOO (SHoT_CoRPSe)...We shall have to see!!
6. Rhys (if I have a car) 182 - 173.8bhp
7. dmallett - 350z - 260bhp.
8.Jasonlt-Ph2 172- 165-170bhp
9. Scott - Ph2 172 Cup - 165-170bhp
10.Paul182 - 160-70bhp
11. Tom-173 - PH1 clio, 165bhp.
12. kielT - 182 170bhp?
13. Domsclio182-182 over 200 bhp
14. Chri5 - 172 -170bhp?
15.
16
17.
18.
19.
20.
​

 

[d4vy]

Was well impressed with what my 225 made before! Such a shame I no longer own anything worth running, was a great day last time (and a rather long one with Riches car refusing to start at the end ).

I should bring my 1.8 tdci focus along and really set the rollers going. :quiet::rasp:

 

[DannyR]

Lol, you should still come down to say hello Matt, it's been 7-8 months since your last meet hasn't it?

 

[d4vy]

May suggest hitching a ride with Lewis if his car is done...if not may come down in mine yeah.

It's been way too long! :nono:

 

[LewisTaylor]

May suggest hitching a ride with Lewis if his car is done...if not may come down in mine yeah.

It's been way too long! :nono:

I'll be lucky, booked this weekend off with the intention of getting my engine in, but subframe and lots of little bits are still at powdercoaters If they aren't done next week i'm getting them back and going somewhere else.

So i'll have to jump in the focus with you lol.

 

[JHead]

Seeing as i'll still be 16 i wont be able to drive myself there.. :/ and my car wouldnt be worth putting on.. i think i'd rather believe/dream it still has the 75horses it supposedly left the factory with!! However if anyone is going from stowmarket/needham area would i be able to grab a lift? i think it would be great to start to get to know some of you guys and hopefully pick up some tips etc.
Also i did some work experience at scholar so know rindy and the guys at scholar... not that thats important.. just thought i'd do some name dropping

James

 

[Greeny.]

Seeing as i'll still be 16 i wont be able to drive myself there.. :/ and my car wouldnt be worth putting on.. i think i'd rather believe/dream it still has the 75horses it supposedly left the factory with!! However if anyone is going from stowmarket/needham area would i be able to grab a lift? i think it would be great to start to get to know some of you guys and hopefully pick up some tips etc.
Also i did some work experience at scholar so know rindy and the guys at scholar... not that thats important.. just thought i'd do some name dropping

James

Might be good for a discount

 

[JHead]

Might be good for a discount

lol.. i dont know him THAT well.. tbh just looking to get to know you guys seeing as i just got my car so i can pick up anything i can like tuning tips/advice on what to upgrade etc, its all very well reading on here, but seeing the evidence annd seeing what it actually looks like is a lot more etc.... sooo.. any lifts going??

 

[hodgy21]

1. DannyR - Ph1 Clio 172 - 250bhp
2. potter88 - Ph2 172 Cup - around 165-170bhp as Standard apart from ITG Panel Filter and Catback
3. Greeny. - Ph2 172 - Anything better than my previous 174bhp
4. T9 0LLE - Ph2 172 - Never had it on a dyno, running BMC Carbon Filter, Decat and Piper exhaust
5. P17 TOO (SHoT_CoRPSe)...We shall have to see!!
6. Rhys (if I have a car) 182 - 173.8bhp
7. dmallett - 350z - 260bhp.
8.Jasonlt-Ph2 172- 165-170bhp
9. Scott - Ph2 172 Cup - 165-170bhp
10.Paul182 - 160-70bhp
11. Tom-173 - PH1 clio, 165bhp.
12. kielT - 182 170bhp?
13. Domsclio182-182 over 200 bhp
14. Chri5 - 172 -170bhp?
15. hodgy21 - 182 - 170bhp
16
17.
18.
19.
20.

 

[BLT]

Might as well come along to this, would be a good way to meet local Clio owners. Get a feeling I might be disapointed with my read out though

1. DannyR - Ph1 Clio 172 - 250bhp
2. potter88 - Ph2 172 Cup - around 165-170bhp as Standard apart from ITG Panel Filter and Catback
3. Greeny. - Ph2 172 - Anything better than my previous 174bhp
4. T9 0LLE - Ph2 172 - Never had it on a dyno, running BMC Carbon Filter, Decat and Piper exhaust
5. P17 TOO (SHoT_CoRPSe)...We shall have to see!!
6. Rhys (if I have a car) 182 - 173.8bhp
7. dmallett - 350z - 260bhp.
8.Jasonlt-Ph2 172- 165-170bhp
9. Scott - Ph2 172 Cup - 165-170bhp
10.Paul182 - 160-70bhp
11. Tom-173 - PH1 clio, 165bhp.
12. kielT - 182 170bhp?
13. Domsclio182-182 over 200 bhp
14. Chri5 - 172 -170bhp?
15. hodgy21 - 182 - 170bhp
16. BLT - 182 - 175bhp
17.
18.
19.
20.
​

 

[hodgy21]

Might pop in here for a bit of food!

http://www.chillicompany.com/

 

[dmallett]

Might pop in here for a bit of food!

http://www.chillicompany.com/

Heard good things about that place!

 

[hodgy21]

http://www.edibleornamentals.co.uk/

I went to this place over the bank holiday and bagged myself half a Tesco carrier bag of pick your own chilli's for £6. They had everything from standard bell peppers to dorset nagas and everything in between. I'm not a big fan of McDonald's so I'll fill my belly with fire instead!

Is anyone coming from Peterborough/Bedford/Cambridge? Or can I tag along with the Newmarket bunch?

 

[markerboy2002]

Do we have to dyno the car or can we just turn up to see this going on? mine was dyno'ed just before I bought it and it was sat at 182.8 horses

 

[Rhys Beal]

Do we have to dyno the car or can we just turn up to see this going on? mine was dyno'ed just before I bought it and it was sat at 182.8 horses

For £30 you can put it back on...in fact I will have £30 with you that on these rollers you don't get that result

Alternatively you can watch yes

 

[dmallett]

I wonder if they will let us have a bbq? i like them.

For £30 you can put it back on...in fact I will have £30 with you that on these rollers you don't get that result

Alternatively you can watch yes

lol.

 

[Rhys Beal]

I wonder if they will let us have a bbq? i like them.

You and bbq's!


Hopefully you will have one round mine before the weather goes even worst than it is...

 

[DannyR]

Don't see why not Dan, you can bring your "BBQ" if you wish

Markerboy, where was yours done before? Rindy's is known to be very very reliable, although I imagine it has been recalibrated.

I'm still waiting for 100% confirmation

 

[markerboy2002]

Not 100% sure, I'll have to go hunting for it. I'm just up for meeting a few of the others in the group as I've only been to a few meets. it'd be great to come down and see everything going on. Oh and it's Tom

 

[DannyR]

I crap with remembering name sorry!

More than welcome to come and watch