ohms at 5th injector

[5turbo/willy]

bloody things impossible to get of is there anyother way of testing the resistance across the 5th injector?

 

[5turbo/willy]

take it thats a no

 

[JAY172]

check it at the injection ecu plug instead(one wire anyway).the other wire is fed by a relay in the relay box(injection locking relay).why are you checking the resistance?

 

[BenR]

should be 10 ohms +/- 5 ohms.

Its not too hard to get off, its an awkward place, but just take the connection off and measure across the pins.

They rarely fail though, being a simple on/off spooge fuel type injector.

 

[JAY172]

ignore my previous post as you need to remove the connector to check across the injectors pins itself to get the resistance.you wouldnt get an accurate reading using the relay wire as this feeds a lot of other components as well.Never once had a problem with the cold start injector so its doubtful if thats the cause of your original problem.