Oz wheels on 182

[jay182bg]

What offset am I looking for looking at getting some for my track project there's currently a single on on eBay heard there's a few dif offsets what am I looking for

 

[theburns1]

Pretty sure it's 35 or 38

 

[jay182bg]

ok cheers on lot ive seen are 43?

 

[Sesqui89]

ET43 would still fit (assuming you don't need to clear any big brakes etc). They just won't stick out into the arches as far.

 

[Mr Plums]

My 16" oz ultra's are et37 and fitted perfectly, I have 20mm spacers on the front which caught the arches slightly on full lock with 205 tyres, I now have 195 tyres which gives no scraping at all.

So if you get 16" et37 and you want spacers, I would go 16mm fronts and 10mm rears, I have 5mm rears and theres room for improvement.

The lower the number of the 'et' offset, the further the wheel will stick out and fill the arches.

Dont forget to get spigot rings too, iirc you will need 60.1mm centre bore.

 

[jay182bg]

Thanks guys not got big brakes to clear but would like them out further a bit not lost under arches
Current pic of it atm front has spacers on wen I bought it

 

[Martin.]

Every 15" OZ F1 I've seen or had, has been ET43.

So like most people, you'd probably want 10-15mm spacers at a minimum.

 

[Mr Plums]

That looks pretty much perfect from that angle mate.

 

[jay182bg]

Rubs a little on back one Side tho need to get wheels of Realy see see what offset they are then has some spacers on front.

 

[Martin.]

The wheels on their now looks like TD1.2s to me? They'll be ET35

 

[Mr Plums]

You would probably need 10mm max on the front and 10mm max on the back with et35 offset, thats like having 20mm spacers on the fronts and 20mm spacers on the rears if you had standard et45 182 alloys.

I'm not sure how much you can space the wheels but im sure ive read people have 20mm fronts and 20mm rears on standard wheels.

 

[jay182bg]

The wheels on their now looks like TD1.2s to me? They'll be ET35

Yes they are pro race mate. There mint like brand new just not sure on if correct fittement

 

[jay182bg]

You would probably need 10mm max on the front and 10mm max on the back with et35 offset, thats like having 20mm spacers on the fronts and 20mm spacers on the rears if you had standard et45 182 alloys.

Thanks mate will try get them of soon to look

 

[jay182bg]

Pic from the back

 

[Mr Plums]

Pic from the back

Looks low that dude, what suspension you got?

Are they 15's?

 

[fivepointnine]

I have 16" superleggera's on mine and they are 35 offset, fit absolutely perfect. I will try and get a pic up later.

 

[jay182bg]

Ok mate cheers yea there 15" will look in a min had coilovers on wen i got it

 

[jay182bg]

It's new freind

 

[jay182bg]

Liquid yellow 265 trophy of subject I know

 

[jay182bg]

You would probably need 10mm max on the front and 10mm max on the back with et35 offset, thats like having 20mm spacers on the fronts and 20mm spacers on the rears if you had standard et45 182 alloys.

I'm not sure how much you can space the wheels but im sure ive read people have 20mm fronts and 20mm rears on standard wheels.

Spacers ok on track days?

 

[fivepointnine]

 

[jay182bg]

Looks nice mate

 

[imprezaworks]

Spacers ok on track days?

Yeah fine unless they arnt the best of brands. I have et40 on mine with 20mm on the front and ten on the rear. If you didn't want spacers but lowz you will need a lower offset wheel so they sticky out 'e' more.

 

[jay182bg]

Ok cheers will get mind of over weekend and look

 

[Martin.]

Why would you want to change what you've got now?

You've got great wheels and they come in a great offset of ET35.

It's what I've got, I've just added an additional 5mm spacer on the front.

 

[Sesqui89]

Why would you want to change what you've got now?

You've got great wheels and they come in a great offset of ET35.

It's what I've got, I've just added an additional 5mm spacer on the front.

This. Looks epic as it is.

 

[jay182bg]

Just fancy a spare set. Guess they can wait as I need some harnesses yet for my buckets a better steering wheel. Decat and induction. Also some track tyres and think may need rear arches rolled as its marked the tyre rubbing on one side

 

[jay182bg]

What size tyre people think? Going for some ad08s 196 50 15?? Will upload spacers below as I mentioned earlier

 

[jay182bg]

front

rear

 

[Mr Plums]

Looks like 20mm fronts and 10mm rears to me.

 

[jay182bg]

thats what i thought rekon 195 50 15 ad08s?

 

[Mr Plums]

What size tyres are on at the moment?

 

[jay182bg]

Think same as above don't know if was better for track?

 

[imprezaworks]

205:50/-15 imo

 

[ripp]

I have 16" ultras and it scrapes the rear arches. I have no spacers but the 595 rs-r are slightly wider than other tyres and they do scrape a little. couldn't imagine how you could get 10 mm spacers on the rear with any 205 tyre without it rubbing

 

[jay182bg]

I have 16" ultras and it scrapes the rear arches. I have no spacers but the 595 rs-r are slightly wider than other tyres and they do scrape a little. couldn't imagine how you could get 10 mm spacers on the rear with any 205 tyre without it rubbing

Will prob go 195 50 15 how do you find the 595 rsr

 

[imprezaworks]

I have 10mm axle spacers with 205 tyres lowered on h&r springs, doesn't rub.

 

[Mr Plums]

I have 10mm axle spacers with 205 tyres lowered on h&r springs, doesn't rub.

I have 5mm spacers and 195 tyres with ultras and it doesn't rub, I had 205 tyres before and it still didn't rub, all while lowered 40mm on apex, its the fronts that I had slight scrubbing with when turning.

I'm going 10mm rears as they look a bit lost in the arches still.

 

[ripp]

Will prob go 195 50 15 how do you find the 595 rsr

They are really good on the dry, didn't actually track them but on a dry road they are fantastic, I never had the guts to push beyond their limits, waiting for a track day for that

 

[jay182bg]

cheers mate thinking about some may be tracking it this year