power cable to battery valver help...

[Jonesy]

Hey, almost finished installing my bros fusion amp and sub in to his 95 m reg valver. But got a bit stuck on getting the power cable to the battery. Any ideas i did a search on the forums, but couldnt find anything.

I couldnt see a grommet like in my 172, and dont really wanna drill a hole.

Any help would be apprecaited

Thanks

Allan

 

[Jonesy]

Dont worry found a gap. all connected up right but doesnt work, dont understand!!! Earth is fine screwed into bare metal, remote is fine, power is ok but no light on amp! im confused!

 

[Wazza182]

were did you find the hole as im installing my ice tomorrow, i usually use the grommet via the clutch cable.

 

[Pat_986]

On the MK1 there is a grommet in the passenger foot well, right up the top to the far left.

Jonesy; Check the inline fuse holder, then the fuses on the amp

 

[Wazza182]

ah nice one i will give that a go in the morning.nick

 

[Jonesy]

problem was my brothers headunit the remote was dead on it, he needs to get a new one anyway so i told him to get a alpine.