ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Project ph-black
- Thread starter payton31
- Start date
Clio ph2 172
http://i851.photobucket.com/albums/ab75/payton31/fdc9096a.jpg
Rage is gunna kill me but sneak pic ladies as he lives at the bottom of my street
Rage is gunna kill me but sneak pic ladies as he lives at the bottom of my street
Clio ph2 172
few updates
View attachment 68184View attachment 68183
fitted a hid kit and quickly fitted my engine mount
car is outside now for a lil while anyway
View attachment 68184View attachment 68183
fitted a hid kit and quickly fitted my engine mount
car is outside now for a lil while anyway
Clio ph2 172
little sneak preview :0 what you guys think ?
View attachment 68270
to complete the handling i now need :
polybushed wishbones
polybushed anti roll bar
front 7mm spacers
fit my camber shims so -1.0'
rear 10mm hubcentric spacers
fit yoko paradas 195/50/15
change front camber to -1.4'
then get a full geo setup anyone know were to go around cannock area ????
View attachment 68270
to complete the handling i now need :
polybushed wishbones
polybushed anti roll bar
front 7mm spacers
fit my camber shims so -1.0'
rear 10mm hubcentric spacers
fit yoko paradas 195/50/15
change front camber to -1.4'
then get a full geo setup anyone know were to go around cannock area ????
Last edited:
Clio ph2 172
i think im going to bring her out on my 20th which is like 21st feb so not that long now peoples 
engine will be running early january no matter what , got a few bits to buy this month like
polybushes,
exhaust hangers,
couple of lil things
its deffo coming out as a subaru pi**ed me off last night, was half way out overtaking a car in the polo with my indicators on, and a subaru wrx like bullied his way through and shot past me the di*hea*d, and i just got thinking he wouldn't of done that if i had the clio out i would have pushed him down the road lol !
engine will be running early january no matter what , got a few bits to buy this month like polybushes,
exhaust hangers,
couple of lil things
its deffo coming out as a subaru pi**ed me off last night, was half way out overtaking a car in the polo with my indicators on, and a subaru wrx like bullied his way through and shot past me the di*hea*d, and i just got thinking he wouldn't of done that if i had the clio out
i would have pushed him down the road lol !
Clio ph2 172
Clio ph2 172
Clio ph2 172
right bit of bad news today,
all started well went to euro car parts got the exhaust hanger , come back jacked the car up, started to take pulleys of the cam so we could refit the rocker cover then i noticed that the valve springs were down on two nearest the driver so on further inspection manifold off, got a mate with me to help he thinks the same as me two bent valves anyway ill let the pics do the talking......
View attachment 68614View attachment 68615
heres a few pics of the exhaust mount
View attachment 68616
few pics of the car poor thing
View attachment 68624View attachment 68623View attachment 68622View attachment 68621View attachment 68620View attachment 68619View attachment 68618View attachment 68617View attachment 68625
ohh and the other bit of bad new is that , went to a place called motormania too get some tools , got quoted £103 for headset and headbolts thought great although they cant do the valves, but gsf want 130 for the lot. got the tools home thought right started to take the head off un-did the outside ones fine but 4 bolts in the middle have now rounded off. my idea to weld a nut /socket to the bolt might work. has any1 else got any ideas ?
all started well went to euro car parts got the exhaust hanger , come back jacked the car up, started to take pulleys of the cam so we could refit the rocker cover then i noticed that the valve springs were down on two nearest the driver so on further inspection manifold off, got a mate with me to help he thinks the same as me two bent valves anyway ill let the pics do the talking......
View attachment 68614View attachment 68615
heres a few pics of the exhaust mount
View attachment 68616
few pics of the car poor thing
View attachment 68624View attachment 68623View attachment 68622View attachment 68621View attachment 68620View attachment 68619View attachment 68618View attachment 68617View attachment 68625
ohh and the other bit of bad new is that , went to a place called motormania too get some tools , got quoted £103 for headset and headbolts thought great although they cant do the valves, but gsf want 130 for the lot. got the tools home thought right started to take the head off un-did the outside ones fine but 4 bolts in the middle have now rounded off. my idea to weld a nut /socket to the bolt might work. has any1 else got any ideas ?
Clio ph2 172
http://www.eurocarparts.com/ecp/p/tools/hand-tools/general-tools1/extractors/?SEAAK728&0&t5_206
think something like this will work ?
think something like this will work ?
Clio ph2 172
had an hour on the car today while the mrs popped out lol managed to get the exhaust sort of on needs the back box twisting i think but here goes,
View attachment 68947View attachment 68948
View attachment 68947View attachment 68948
Clio ph2 172
Here is what i believe to be a full spec list for 2012 -
Engine
Engine
- KTR 172 decat pipe
- KTR 172 supersports stealth system - done
- CNC matched inlets
- ITG air filter with proper cold air feed
- KTR billet lightweight flywheel 5.3kg > 3.7kg
- KTR 438 high-lift cams
- KTR custom remap
- KTR coilover kit - done
- KTR solid top mounts - done
- KTR full engine mount kit - done
- Powerflex - wishbones,anti-roll bar and dogbone mount
- Whiteline rear anti-rollbar - done
- Front -Brembo high carbon disks
- Front -Ferodo ds2500's
- Rear - KTR uprated rear dimpled disks
- Rear - Ultimax pads
- KTR braided hoses
- Motul RBF660
- Rear camber shims 1.0 degree - done
- 1.5 degree of negative camber
- 1.0mm of toe out
- Yokohama parada spec 2 all round
Struggler
ClioSport Club Member
Ph1 track 172
our specs are nearly identical other than the engine!
only differences is
Gaz coilovers,
Carbone Lorraines
and gen rear discs and pads!
seems like a good set up!! but unfort engine work is slightly out of my budget atm, im just going to take it out and give it a good service and a lick of paint!!
only differences is
Gaz coilovers,
Carbone Lorraines
and gen rear discs and pads!
seems like a good set up!! but unfort engine work is slightly out of my budget atm, im just going to take it out and give it a good service and a lick of paint!!
Clio ph2 172
This is sadly going on hold for a while as ive got a new motor, think i'm swapping most things over to the Ph2 aswell.
http://www.cliosport.net/forum/showthread.php?619225-New-black-172-clio-)
http://www.cliosport.net/forum/showthread.php?619225-New-black-172-clio-)
Nickson
ClioSport Club Member
PH1 is so much nicer it hurts!
Not that I used to own one or anything...
Nevermind, both cars looking good mate
Not that I used to own one or anything...
Nevermind, both cars looking good mate
