Quick ball joint question

[Djw Dave]

Looking to swap the bottom ball joints on the cup. My local factor has the same ones listed for cup and non cup. Is this correct? I know there's a difference in wishbones but is there any difference for the ball joints?

Thanks guys.

 

[MG cup]

No Dave just make sure they come with the 12mm bolts as the non sports come with 10mm.

 

[Djw Dave]

Yeah I've had a few for the sports but just wanted to check the cup was the same. My parts guy at dingbro is usually spot on but like I say just wanted double checking.

 

[nath&alex]

To jump in on this one, is there a difference between ph1 172 & Ph2 172/182? I am after some for my ph1 but ECP dont list them for Ph1

 

[Matt e]

think they use the same

http://www.eurocarparts.com/ecp/c/R...ontent=awin+traffic&utm_campaign=Sub+Networks

 

[dmallett]

There are 10mm and 12mm ones on the ph1 iirc.

Ive only ever had 12mm ones though so that might be a myth.




And for anyone wondering where I got that info from, I read it on here a while back

 

[nath&alex]

Well I'm gonna see Feirny at ECP with one of my spare PH1 hubs and then we'll know for sure