Rear beam bolts

[DomP182]

I'm not getting a reply from RPD, does anyone know where else I can get the 6 rear beam bolts and nuts or whether using standard 130mm high tensile bolts is ok? I'd like to keep it standard really.

 

[botfch]

You could try Renault parts Wolverhampton if there still around.

High tensile bolts is what I planned on using, only issue I’ve found is minimum orders for decent ones was 100s of bolts.

 

[Amos91]

https://www.renaultgenuineparts.com/renault-7703015200-vis-en-cage-m10x1/ x 6

https://www.renaultgenuineparts.com/search.php?search_query=7703034247&section=product x 6

 

[DomP182]

Ouch! I thought they were more like £6 each, I might clean them up as they arent too bad just the nuts that have suffered.

 

[DomP182]

What grade of high tensile do they need to be? Ebay surely would have them

 

[botfch]

What grade of high tensile do they need to be? Ebay surely would have them

10.9 if you want some kind of corrosion protection as well.

 

[DomP182]

10.9 if you want some kind of corrosion protection as well.

The OE ones and a decent protection on them dont they

 

[botfch]

The OE ones and a decent protection on them dont they

By Renault standards sure..

Tbh I’m only swapping to normal bolts because I hate the stupid clip design.

 

[DomP182]

By Renault standards sure..

Tbh I’m only swapping to normal bolts because I hate the stupid clip design.

M10 x 130 aren't they?

 

[botfch]

M10 x 130 aren't they?

Originals are M10 yeah length sounds about right.

 

[Steveball]

I'm not getting a reply from RPD, does anyone know where else I can get the 6 rear beam bolts and nuts or whether using standard 130mm high tensile bolts is ok? I'd like to keep it standard really.

@YorkshireKyle what did I send you? Is this the same thing?

If so I can possibly organise a group buy from a fasteners company.

 

[botfch]

@YorkshireKyle what did I send you? Is this the same thing?

If so I can possibly organise a group buy from a fasteners company.

If your doing that I’m in.

 

[DomP182]

@YorkshireKyle what did I send you? Is this the same thing?

If so I can possibly organise a group buy from a fasteners company.

Yes I'd be up for this, probably quicker than RPD

 

[Martin_172]

They are on back order with Renault so currently unavailable.

I went down this route!

Rear Axle Beam Mounting Kit Inc Bolts & Nuts Fits Renault Clio Luteci Febi 44700 | eBay

Find many great new & used options and get the best deals for Rear Axle Beam Mounting Kit Inc Bolts & Nuts Fits Renault Clio Luteci Febi 44700 at the best online prices at eBay! Free delivery for many products.

www.ebay.co.uk

 

[Steveball]

I know they have minimum order values etc but it’s the other halves mum who works there, plus they are in Basildon so someone can organise down there if I facilitate the contact [emoji106]

 

[Steveball]

I am not being lazy but I am unreliable, and don’t want to let people down.

 

[Matt e]

RPD never reply to emails

Renault Wolverhampton, gearge is alright he'll answer your emails, but there not currently ordering parts only for key workers

allcarpartsfast/genuine renault parts, cant order parts from the suppliers at the moment

 

[Martin_172]

RPD prices are great and service is great once you order but the enquiry service is SLOOOW or non existent, was the same before corona!

 

[Krarl]

@YorkshireKyle what did I send you? Is this the same thing?

If so I can possibly organise a group buy from a fasteners company.

The ones you sent me were for holding the stub axle on mate😀

 

[Steveball]

The ones you sent me were for holding the stub axle on mate[emoji3]

Well if I get some exact bolt measurements I am happy to get prices [emoji106]

 

[Steveball]

I'm not getting a reply from RPD, does anyone know where else I can get the 6 rear beam bolts and nuts or whether using standard 130mm high tensile bolts is ok? I'd like to keep it standard really.

I have looked at the link, if you send me the pictures of the bolts I will get an answer Monday.

 

[DomP182]

Redirect Notice

 

[DomP182]

@Steveball the nuts for these are flanged and nyloc I'd imagine

 

[Steveball]

@Steveball the nuts for these are flanged and nyloc I'd imagine

Ok leave it with me, I will ask Monday and see what is said.

 

[DomP182]

Cheers mate!

 

[RustyMojo]

Guys sorry to dig up an old thread. The nuts that hold the Renault OE beam bracket in place…I have new caged bolts. But obviously I need the nuts and they are M10 X1.25 nylock I think?

could someone confirm the actual Renault part number is 7703034247. So I can have my pants taken down again and order some? Or I’d there a decent source for aftermarket?

 

[VenomUK]

@DavidDave A quick google of the number seems to indicate that is the correct number. However, I'd be inclined to pop down the local Allfast and get them all for a few quid rather than a quid a pop. Any fastening place will offer equivalent nuts mate. I use G.R. Fasteners in Stonehouse or Allcap in Gloucester.

 

[RustyMojo]

@DavidDave A quick google of the number seems to indicate that is the correct number. However, I'd be inclined to pop down the local Allfast and get them all for a few quid rather than a quid a pop. Any fastening place will offer equivalent nuts mate. I use G.R. Fasteners in Stonehouse or Allcap in Gloucester.

Cheers mate, but it appears M10 high tensile 1.25 fine thread flagged nylons are as rare as rocking horse bollox

 

[VenomUK]

Cheers mate, but it appears M10 high tensile 1.25 fine thread flagged nylons are as rare as rocking horse bollox

They have them on eBay for £4.99 for 2

 

[RustyMojo]

They have them on eBay for £4.99 for 2

You got a link mate?

 

[VenomUK]

You got a link mate?

I didn't read the description, isn't clear if they are the right one or not?

Pardon our interruption...

 

[RustyMojo]

I didn't read the description, isn't clear if they are the right one or not?

Pardon our interruption...

Yeah I saw them, it’s not clear if it’s 2 bits or not either. I have messaged them. But will likely source elsewhere as I’m not sure what I’m actually getting from them. Let’s see what they come back with

 

[VenomUK]

Yeah I saw them, it’s not clear if it’s 2 bits or not either. I have messaged them. But will likely source elsewhere as I’m not sure what I’m actually getting from them. Let’s see what they come back with

Did you try a local fasteners with any luck?

 

[RustyMojo]

Did you try a local fasteners with any luck?

Not as yet mate just online specialists.

 

[RustyMojo]

I can get them without the flange for very little ££ may just buys some washers!

 

[VenomUK]

I can get them without the flange for very little ££ may just buys some washers!

As long as they are to the correct tensile then adding a washer will be fine, think it's being over complicated than it needs to be

 

[RustyMojo]

As long as they are to the correct tensile then adding a washer will be fine, think it's being over complicated than it needs to be

Don’t disagree, I’ve read the arguments for flange over washer and nut…to be honest, I’m just gonna send it with the washer/nut combo. Just need to double check there is enough space on the bracket itself for a washer to fit.