Remove dash top?

[kerry-w]

Had a look in the guides section but couldn't fine anything to help me

Just need the get the middle bit out with the clock/seatbelt and door light in to replace the screen.

Thanks for any help.

 

[Beef-Mc]

http://www.cliosport.net/content/guides/fubar/ph1_dashboard.pdf

Obviously forget to check the stiky at the top of the page.

 

[kerry-w]

Ohh, I didn't realise that was full of guides.

Thanks for telling me will come in handy now.

 

[fUbAr]

 

[kerry-w]

Thanks for the guide made a start and was all going well until I read "You need a Torx20"

Trip to halfords later on is on the cards.

 

[MonkeyKnifeFight]

i need to get the top bit of my dash off to (its on my ever growing list of things to do lol) ive got an annoying rattle near the windscreen behind the speedo, the process doesnt look particularly tricky but now ive said that im sure it'll take me several hours longer than expected or more than likely result in me driving a car with not upper dash for several weeks

Good luck playing, its good to see your not afraid to get in there and pull things apart

 

[fUbAr]

It's really not that hard. The hardest part is not dropping the screws down the top air vents!

 

[LOCUST]

thats excellent, is it the same for a phase 2 ? 2003 model ? i gotta sort out that annoying rattle by the air vent !!!

 

[MonkeyKnifeFight]

It's really not that hard. The hardest part is not dropping the screws down the top air vents!

This will definitely happen when i give it a go fix one problem but create another the circle is complete lol

 

[kerry-w]

Put some masking tape over the vents when your doing it

Got them all out bar the two stupid ones under steering wheel, need a long torx screwdriver for them